Know anybody here in hawaii with the special tools to pull dohc head off? Gotta replace bent valve rods soon

but you can push it to drain the fuel in the rail, then turn the key, don't try to start, wait 10 seconds and then push it again. if fuel comes out then you are getting fuel TO the rail. no need to look at the fuel pump or filter. you can check flow through the filter simply by disconnecting the lin...

This happened to me some months ago. I did a lot of work before finding out what happened to mine. Visually check your timing marks. If they don't then then your crank pulley gear may have wore off the crankshaft. Mine is the second 02 s60 that I know that had happened to this year. There are many o...

Problem solved. Found solution on another topic, timing gear crank pulley.

Yes and I guess it can't be that rare. Mine makes number two. Barely two weeks after you figured yours out huh? I did a LOT of work on mine up until i found this topic about your car. It was at a point we're I could turn it by hand. Now its stuck and i cant wiggle it out. Did the dealer happen to sa...

I'm gonna pull my HB and look at mine. How much did that gear cost you to replace?

So the last two weeks I have been messing with the timing. Learned a lot about the way to do it fromother posts on the forum. The first time I reset the timing I felt pretty successful the car started and ran as long as I held the gas pedal down and then I let go to pedal and then it proMptly died. ...

Was driving home one day car just lost power and died. A friend of mine thought I was having the same problem as him and we removed/cleaned the throttle body and put it back on. Then we pulled codes and were getting both crankshaft and camshaft sensors, so I replaced those. Removed starter and had i...