The only thing I found wrong was the SRS light is on. Other than that, can't find anything else.

Found a really clean v70 base with only 94k. Timing belt, water pump and everything done at 80k. New tires also. Guy wants 3500 for it... Seems tad on high side. What do you guys think??

Lee... I have zero voltage running to compressor. Fan relay and low voltage all testing fine. If I apply 12v directly to compressor it runs. Here's new strange...If I reset the ecu by pulling battery cables, and jump the low switch the compressor will kick on and run a second. I cant duplicate unles...

I have same type of problem going on with mine... Yes you can cut and splice after the thermal.

If I apply 12v to the male/female connector before the thermal.. compressor starts and runs fine. Think I should bypass it just to double check?

12.15v at low pressure plug when ac is turned on.... Do I'm assuming control is good.

98 s70 NA, man controls. Light on ac switch comes on. I'll check low preasure voltage and the fan relay. I'm gonna chase this till I fix!!! Thanks a ton for the help Lee

Ok I will test it in morning. Any ideas if it's good? Kinda lost. Especially since compressor won't run with low pressure jumped.

Thanks lee... I jumped the low switch and compressor doesn't start, even with low freon it should start... Only way compressor starts is when I give it 12v at the male connector before the thermal link. I swapped relay on fuse panel and didn't change. Thinking the fan relay might be bad. Nothing els...

Hey all....pretty solid on ac diagnostics, not great but I get it.... Jumped low preasure switch and compressor kicked on for split second. Checked fuse and it's good. I unplugged male wire before thermal fuse and applied 12v and compressor runs fine, fan doesn't come on with compressor.. Any ideas,...