Search found 6 matches
- 21 Jul 2014, 08:30
- Forum: S60 2011+ V60 2015+ XC60 2010-18
- Topic: 2003 S60 Brake Pedal Buzz
- Replies: 3
- Views: 2201
Re: 2003 S60 Brake Pedal Buzz
Thanks for your response. I replaced the brakes and roters about 6-7 weeks ago an they are working fine. I did brake one of the parking brake shoes when removing a stuck roter and have not gotten around to installing the new parking brakes. Also, the occurs sometimes when the car is turned off. I am...
- 21 Jul 2014, 08:06
- Forum: S60 2011+ V60 2015+ XC60 2010-18
- Topic: 2003 S60 Brake Pedal Buzz
- Replies: 3
- Views: 2201
2003 S60 Brake Pedal Buzz
Hello All, Has anyone experienced hearing your brake pedal 'Buzz" when depressed or released from the "Park" position? Would you know the problem and how to fix it? More importantly, is it dangerous? Just for clarification, this is a buzzing sound, not a "Whistle" which seem...
- 03 Jul 2014, 13:58
- Forum: S60 2011+ V60 2015+ XC60 2010-18
- Topic: 2003 S60 PCV Replacement Issue
- Replies: 2
- Views: 2220
2003 S60 PCV Replacement Issue
Hello, I just completed the replacement of my oil sluggy PCV Breather box system. Well, the replacement was able to stop the whistle sound that was coming from the engine, but now the car will not idle properly in fact after start up it stalls completely. if I disconnect the MAF (brand new) and the ...
- 21 May 2014, 12:11
- Forum: S60 2011+ V60 2015+ XC60 2010-18
- Topic: 2003 s60 P0171 Bank 1 System too lean
- Replies: 1
- Views: 2628
2003 s60 P0171 Bank 1 System too lean
Hello,
I just replaced the Mass Airflow Sensor and still get a rough idle and a whistle in the engine. any suggestions on what to do next?
thank you,
I just replaced the Mass Airflow Sensor and still get a rough idle and a whistle in the engine. any suggestions on what to do next?
thank you,
- 16 Apr 2014, 11:28
- Forum: S60 2011+ V60 2015+ XC60 2010-18
- Topic: 2003 S60 Timing Belt Replacement - Gone Wrong
- Replies: 2
- Views: 1916
Re: 2003 S60 Timing Belt Replacement - Gone Wrong
Thank you, I understand and will attemp to reialign the cam marks. Funny, after I did this I was able to actually remove the crankshaft plate below the crankshaft pulley to remove the timing belt. It was very tight but I was able to snake it through to get it off and put the new one it. Wish I known...
- 16 Apr 2014, 07:50
- Forum: S60 2011+ V60 2015+ XC60 2010-18
- Topic: 2003 S60 Timing Belt Replacement - Gone Wrong
- Replies: 2
- Views: 1916
2003 S60 Timing Belt Replacement - Gone Wrong
Hello All, in attempting to replace the timing belt on my s60 at 180,000 miles I ran into problems removing the Crankshaft Pully Bolt with a 30mm socket. I wedged both of the top cams in place with marks aligned to the cover then pulled hard on the bolt to losed but no luck, infact I heard a bad noi...






