I was not able to repair my throttle body. I ended up buying a new etm with yellow label from an 02 C70. Replaced my white label etm and it worked perfectly without sw mods. Still running today

Should the throttle plate on ETM spring back to closed position when moved? Mine seems to be sticky - see video

Video attached now

Hi guys, My 01 S60 2.4T went into full limp mode with ETM code. Not too many miles ago I cleaned it, so I figured the sensor has finally crapped out. New contact less sensor arrived today so I took out ETM and began installation. But I noticed the spring cannot easily return the throttle plate. Seem...

The symptoms are shifting in and out of gear while stopped. It gets worse the longer I drive (especially in long traffic jam). Also it is starting to downshift hard after letting off the accelerator. The hard down shift worries me the most because this is new. I have been able to ease the neutral sh...

I have the dreaded 01 S60 transmission with stop neutral feature. The car has about 140k miles on it. I have had a little trouble from the transmission in the past, but could always make it happy by changing the fluid. It is no longer happy :cry: Is it possible to put a later model transmission into...

I was looking for cause of 300 mA drain on battery. Yanked out rear seat to follow battery cables and found strange module. Anyone know what this is? Does not look like factory equipment. Perhaps an aftermarket alarm system? It is a Motorola part number 19052WNM8D. Unplugging the cables removes the ...

With the 23 and 27 fuse removed, the voltage drop is about 0.1 volts per 15 minutes. The voltage was at 12.5 volts with everything connected and ignition off. and 30 minutes later the battery voltage reads 13.3 volts on the battery terminals. "Big improvement", but the car will not start n...

Oh yeah - voltage across battery while engine running is 13.6 volts every time I check it. Seems normal