2010 xc60 t6 got multiple misfires and replaced ignition coils and plugs ran fine for a day then theu codes again for misfires on cylinders 3 & 4. The firing order is 153624 is this correct? What else could be the issue?

Ive replaced the thermostat last year. The metal factory band slid off the hose. I will make sure everything comes out. I only plan on having the car maybe 2 more years. After my daughter finishes her masters program. The csr has a lot of highway miles, my wife,her old car, is in sales, just gotta g...

Thank you Paul. THAT is the exact hose I had mentioned above! Weird that the site I went to previously to purchase said it was for a different engine code. I must not have read the VIN right.
Thanks Again
Mike

I have a XC60 T6 3.0 I am trying to figure out what this coolant hose is called to get a new one. On passenger side, It is a fitted hose with a clamped end and a screwed in fitting. From block and goes to the the other side of the oil filter. Its probably 5-6" long kinda "S" shaped i ...

All, I have a 2010 XC60 T6 AWD that started making a leaking exhaust sound by drivers side front that disappears after the car warms up. This to me would be similar to an exhaust manifold gasket or bolt breaking. I havent gone underneath yet but, is there an issue that is along these lines? To me it...

Hey all Ive posted before about this error message. I changed the voltage regulator and no errors for 3 months. Just got the error again :x I have another regulator but i feel at this point ill need to get another alternator. I see there is 2 different ones. How can i tell which one i have while the...

Thank you Rick! That's all I needed.

Hi all
10 xc60 t6 3.0 - I took the intake manifold off to get at the voltage regulator off. I have the new regulator in. I'm looking for the bolt pattern and torque specs. Or snug bolts the torque to 14lbs?
Thnx

No I did not bed brakes I did moderate stops at distances and drove for a little while. I don't understand why ceramic brakes would give a soft pedal though. Typically I have found the break pedal would seem to catch sooner. It seems as though, to me, that the pedal is low? That's what made me belie...

Hello first post - trolling for various fixes over the years. I changed rear rotors and pad and front pads on my 2010 XC60. The rear was in tough shape the fronts were changed some time ago and were good but changed anyways. My wife drives a lot for work so I didnt want there to be any question if b...