What about a valid copy of Vadis and the correct cable? Is this an option and how would I go about getting it? I tried the torrent route and my laptop doesn't have a DVD player and also seems to have gotten a virus so I rolled it back and deleted the torrent info. I'm not against buying the proper t...

Double checked and crank at mark on oil pump everything lined up. Retarded the intake cam in the pulley slot and cel came on faster. Advanced intake cam in pulley slots and now I have 2 over advanced bank 1 cam codes. Going to put the cam tool back on and go to neutral. However that being said the e...

As I understand typically this means it's off a couple of degrees. Is there anyway to figure out if it's advanced or retarded to much?

Removed them to get the cams out of the cover and replace seals and set valve lash. I used the cam lock tool set. Turned the vvt full clockwise torque loosen sprockets put on cam belt and make sure when all marks alignment neither sprocket adjuster is at the end of the slots, marks align and rear sl...

Hello all, My youngest recently ignored a failing waterpump and skipped timing and bent 12 of 20valves. I replaced all the valves, reset valve lash and reset the intake vvt to the best of my ability using the tutorials on here. I ended up with the vvt fully clockwise and the pulley having some play ...

2005 non turbo VVT intake. I am sure its listed and I swear I searched for hours but I cannot find VVT resetting info for the intake cam. Son ignored the water pump bearing failure and belt popped off, bent valves. I know I will need to reset valve lash by changing the buckets as needed, how best to...