Did some troubleshooting... All injectors are firing. I cleared the codes and that hasn't shown up yet Moved to the coil packs - found Cyl 1&2 are not firing. cleaned common ground point, swapped packs to working cyl - doesn't seem to be a problem with them, swapped spark plugs, failure stays at...

Thanks for the input guys. I'll be doing some troubleshooting of the fuel rail today as well as moving coil packs around. When I tore into it to get the had sent out (bad exhaust valves, same cyl...makes sense if the mechanic disabled fuel to that cyl) I saw that the connector on that injector was s...

Hi! Just finishing up a valve job on this 1999 V70 Turbo AWD I got this summer. Cyl 2 had bad exhaust valves and previous owner said that his mechanic disabled #2 so it wouldn't dump raw fuel into the cylinder and ruin the cat. So... assuming there is nothing broken, where would I look to see where ...

Found it! Thanks everyone!

It is indeed below and left of the CPS. The hose is designed to double-back more than it is to bend around the corner.

abscate wrote:Coolant banjo fitting onto the turbo case. You will need the nut

I have 3 lines already connected, and I don't recall seeing a place for a 4th.

rspi wrote:Looks like the coolant pipe that connects on the side of the head.

Yeah, that's what I'm thinking (exhaust-side of head), but I can't figure out where. It looks like it wants to lay in a certain area, and that bracket throws me farther off into the woods.

Hi!

Putting my 1999 V70 Turbo AWD back together after a valve job, and I can't figure out where this wants to live! It's just around the back corner from the CPS, above the turbo (inlet seen in pic)

Thanks!

Jeff