My throttle body is bad, sent it to BBA reman they could not rebuild the part number is 8644345 does anybody know what part numbers will interchange with 8644345 i was told
that a ****344 will, Are their any other numbers that will interchange?? I am looking for a used
or rebuilt t/b on ebay. the ...

Hay guyes, I have a problem with my 02 s60 When you cold start the car it will run fine, and idle fine, rev up fine, (just like it did for the past 15 yrs) Than after 5-10 mts Idle will drop to 2000rpm and the acceleration pedal will NOT rev the engine (car will not go more than 20mph)
I get codes ...

Thanks Jimmy much appreciated
JIM

Hay guyes anyone have the fireing order for the 2004 xc90 with the t6 engine

Thanks for the info I have herd of Xemodex i downloaded a flow chart from there site. To
see if it is a TB or MAF. I also talked to a tech. from a company BBA- Reman was told that they could rebuild my TB for $250.00 and they would bench test first, if OK will send back for $35.00 + shipping. And ...

Hi guys I saw lots of old threads on the 02 t/body but nothing new (maybe just could not find it)
I think i have t/body issue no power only revs to 2000 - 3000 rpm up and down on it own The only code i get is p2177 think that is for 02 sensor?? Tryed cleaning with T/body cleaner, did not help ...

Welcome to MVS

A flashing CEL indicates a misfire, usually a coil or coils. Try accelerating gently, keep your RPMs up, and your load low, this will make the hour drive easier. Go to nearest auto parts store that reads codes, look for P030X number at X will tell you which coil is toast.

I have ...

thank you for your info. I see that you own a 04xc90 t6 as i do. I just purchassed this at auction with 100k and it drove fine for about a week. I was planning to tow as it was rated for about 4k with brakes. After purchass i found out about the tranny problem with this model xc90. What have your ...

My 04 xc90 t6 Has no take off power when you push the excelerator to the floor from a dead stop it takes way to long to pick up speed,1 minute to get to 40mph, also a strong gas smell. once you get up to speed it runs just OK. This started overnight as it ran great last time i used it. Removed and ...