Hello all, I have a '98 v70 awd and it seems as if the cluster is dead. The tach works but the other gauges dont. I thought maybe the instrument cluster it self is bad but I see the gas gauge move just a bit when i turn the key. Also bought a scan gauge tool to monitor my gas/trip/speedometer but it...

The Resurrection of Rosa is complete! (almost)

Also got these gabriel front struts installed and in the process ended up messing up the sway bar link so i replaced those too. Out with the old leaky ones. 20170418_143550.jpg 20170418_171902.jpg 20170416_122353.jpg Look like good quality and easy to install, plus lifetime warranty. Only thing i di...

Cleaned up the spoiler today. Used some 3m permanent double sided tape to stick it back to the car.

Thanks scot850, it did indeed need a hard tug to pull the b pillar off. As for the sunroof, Klausc is right nothing to service underneath the head liner, i thought the cable thing was binding to something underneath but it wasnt.It would not move either way or tilt up i pulled really hard on both si...

No tilt. It just clicks and torques a bit and then stops. The sunroof wouldnt even move with the motor out. So I noticed the little cables that im assuming move the sunroof were full of lint like materiel. Cleaned them and nothing. 20170410_175313.jpg So i started to pull the headliner but now i can...

So i finally got back to the v70 the other day and after i put it all back together...she still wouldnt start! Cranking but no start. Frustrated i took a breath and thought about what could be wrong...turns out i had swapped #3 and #5 spark plug wire. Put that back and voila it works! I would like t...

Got the pcv done and buttoned up, now just need some help with theses vacuum hoses. Want to make sure everything is hooked up correctly.

1.Where do these go? 2.This looks about right. 3.This too?

Parts are on the the way and coming... The ignition and key assembly arrived yesterday and I was having trouble getting the shear bolts off. Any ideas guys? Got the ones out of the new assembly by using a large vise grip and wrench for torque. 20170331_114348.jpg 20170331_114339.jpg How am I suppose...

sleddriver wrote: ↑30 Mar 2017, 11:31 Be kind to yourself and go OEM with the upper torque mount. The poly versions will transmit more engine vibration.

Oops, went with the IPD poly mount, we'll see how it feels.