so do you have shorts with the modules in or out? If out, did you trace where the offending circuits went to, and see what is on the other end, if it is in place, and if you still get the shorts with the other module in place? I hope the shorts are not in your newly repaired modules.... or a result...

I did the CAN Network Test Procedure from XeMODeX and discovered there are ~0ohms resistance across terminals 6/14, 6/5, and 5/14 on my high speed network. So it looks like I have a/some short circuits...

Exciting

https://drive.google.com/file/d/1ja9sTcMMzduHlvuiYNx2-pcz7oIbeNJM/view?usp=drivesdk That's what it looked like before. Like before I took it to the shop. At the time it drove but had antiskid service warning. To be clear, I cannot access anything like this anymore. I had the VIDA/DICE working all fi...

I would disconnect any module that was messed with and check the pins very carefully, to make sure they are all in place. Check And check all related fuses and relays, too. To me, that seems to be a good reason why the car just dies on the road. But I suggest contacting Henry. He and his protege ha...

Failure to connect canbus will result in modules appearing red in Vida diagnostics. Choose Network and choose each module in turn to see installed software. This way determines if Canbus reaches all modules. As I mentioned earlier what does driver's display say when car won't start? If no message i...

Plug the DiCE into a USB port and use the stand alone DiCE diagnostics application to find out if DiCE is working. If DiCE diagnostics is not installed, "Vida insulation Media":\3PP\Products\DiCE\SetupDiCE.exe Sometime just running SetupDiCE.exe will correct a communication problem. Ran a...

I disconnected the DEM and engine still will not start. VIDA still cannot read anything from the DICE box. I get blinking lights indicative of a good connection, but absolutely no reading ever. Nothing with other OBDII sensors either.

I got my CEM/ECM back from xemodex, trying to connect VIDA/DICE again. In the meantime I just noticed there was a 25amp fuse for the AWD system in rear fuse box. That was the original reason I took the car to the shop, and they said they fixed it with the fuse. It's supposed to be a 7.5amp fuse. It'...

No. I already had it configured with a specific laptop. Had no problems with connection, used it a few times. Now when I click "scan for vehicle" (forget exact term) nothing.

precopster wrote: ↑25 Mar 2018, 14:48 My advice is to have Henry read the car for faults.

My VIDA/DICE does not connect at all, can't read anything.