So, here as I promised! Pulled the head yesterday at mechanic. :!: Timing has jumped couple of teeth altough the belt was okay on tension and condition. Seems water pressure inside caused to the exhaust side a block. Unfortunately I have to change all the 10 exhaust valves too. :cry: The cause why i...

No milkshake! Compression test will be on Saturday due to I don't have the tool here. Sometimes when try to start I can hear 1 bang from the back from the exhaust, so some spark should be. Yeah, I can't for 100%, but until now it started all the time, and since I know about the gasket problem drive ...

Update! - tried the ELM327 with Torque Pro, says no DTCS in ECU, so I need a proper device to read deeper. - injectors were cleaned and refurbished by professional like 4 months ago, there is fuel pressure, tested with the valve 3x times. Also can smell petrol at the exhaust, and see it on the spark...

Sure, I will do the wires, temp sensor was changed like 10'000 kms ago. I already checked them CEM modul for leak, corrosion or loose cable, seemed everything okay.

Thanks for the fast reply! Will go through and check all!

:| Good Evening! Just drove my girlfriend to her workplace, then went home, but when tried to go back for her car didn't start. Happened week ago. Battery was charged. Spark plugs checked cleaned. Wires as possible from up checked. Fuses checked. Fuel is ok. Timing is ok. Crankshaft sensor changed t...

2004 V70 2.5T Just put everything back to place like 8000 kms ago. (new turbo, new rad, new fluids, new head gasket, head was checked and refurbished, new PCV, new hoses, new coolant temp sensor etc.) It seems I have head gasket problem ago, symptoms are almost the same as in the begining of the art...

Nah, no way! I want to keep the VVT!

I just found this of as the cheapest:
https://www.ipdusa.com/product.asp?s=ez ... ory=basket

https://www.ipdusa.com/product.asp?s=ez ... ory=basket

Thansk for the answers! There is no sign around the hubs of oil leak, I guess it is good, but unfortrunately there is more play/wobble than it should be as far as I know it shouldn't be more than 2 mm. As checked with the engineer there marks aren't there where they should be, the belt cahnge has to...