The heated rear seats are rare, I'd buy them right away if you were in Europe. ... about the Center console was only to point put that the removal of the wiring harness ist not very complex. Thank you for ...

Trying to remove the rear seat uppers. I know they are hard to remove, but even after removing the black clips, I’m getting no play on ...

... hurt your feelings. I was super clear however that I had no problem getting them OUT and IN was the issue, tensioned clips only come into play in removal. I guess my comments about a trick I can't find online was to cryptic. I always goto DIY Robert first. He is awesome but his video clearly talks ...

... put load on the torsion bar or else the wheel won’t drop for spring removal Minor pry bar action used to pop springs out One of spring seat bolts snapped but I had UBG in garage. Ordered two FcP 9140723 at $20 as I have this job ...

Agreed, is there a reason for trying to change the upper seat? It looks better than most I see these days, to the point it looks mint. ... or a welded nut it may have broken off. It will most likely be inside the rear frame so not easy to access at all I would think. Unless as suggested there ...

I wonder if the other end is accessible via the back of the car so you can counter-hold it. I'm sure one of the other folks will be able to tell you what trick they used to remove it.

Frankly, it doesn't look that bad. =)

... one of your fantastic topics to replace my rear coil springs (https://www.matthewsvolvosite.com/forums/viewtopic.php?t=95813). ... removing the screw holding the upper spring seat (see picture). The screw turns but does not ... to come out or back in. Any suggestion for its removal so I can replace ...

... the pistons for rust. I learned about piston removal from cn90's excellent front caliper rebuild ... to expand on his work here and add info for rear caliper disassembly (which is easier than the ... a board between the pedal and the front of the seat. This closes "the valve" preventing ...

... visits. I recommend finding and using a glass removal knife (thin blade with a 3" cutting ... Clips on the top edge release, front first, rear last. Put wood or a screw driver against the ... for a few screws. Remove the third row seat belt grill to reveal screws holding the lower ...

.
According to Robert in the beginning of the second video you can remove the seat for door panel removal.
.