... We are currently waiting for a new Throttle body after Volvo replaced the fuel pump under warranty (last one only lasted 40k miles). Also had the MAF cleaned as it was gummed up. Oh, and the alarm service required note is up as well. The issue in question is the car not wanting to come out of ...

... one painted in color!! Anyway, the parts I was looking for were not there as they are only on a T5 not an NA. I wanted the throttle body and the MAF as I had one of each but both went to a friends T5 nightmare to fix it. The S60 was a bust also, so I had a closer look at the C30 as my buddy is ...

... this time, i would- inspect air filter. Make sure it is clean and if quite worn-replace with new. While next to the air filter- remove and clean maf with proper maf cleaning spray. Get yourslef a good fuel injector cleaner additive(i like royal purple, but others will work ok) and run it every ...

Another place to check for leaks, cracks and splits is the intake tube running from the MAF to PCV/PTC inlet and to the turbo.

It appears that Bosch manufactured MAF sensors have become unavailable for my 1998s. Original Volvo OEM still available if you want to shell out $360 (at a reasonable website -- another site wants $812.00!!!). What are folks' opinions on the ...

It appears that Bosch manufactured MAF sensors have become unavailable for my 1998s. Original Volvo OEM still available if you want to shell out $360 (at a reasonable website -- another site wants $812.00!!!). What are folks' opinions on the next best replacement MAF in 2026?

... the reminder to use strong bits! That is a 'security Torx' with the hole in the middle - I think the only place you see them on Volvo is the MAF unit to housing bolts? I just goofed and grabbed it from the kit, instead of the T40. Its a Tekton, so lifetime warranty. :D

... (the light works, it glows after turning the key before starting the car), the battery and alternator are good, I don't think it's caused by the MAF and I never hear any misfires or see a rough idle once the RPMs jump back up to normal. Is this a vacuum leak somewhere, or could it be something ...

... some research Ive learned that my car originally came with a 5 pin connector so that wasnt my issue. However, I have discovered that most new MAF Sensors are made without the rectangular burn off wire that is in the OE Bosch sensors. So now Im just having considerable issues sourcing a new ...

... the issue. To make a long story short I thought I needed a 6 pin connector when my car came with 5. Incorrect. Yesterday I installed a Duralast Maf Sensor, I cannot remember if its got a wire or not but I performed a reset and idle is a little better but driveability is very slow and boosting ...