850 turbo exhaust heat shield removal & installation Topic is solved

[SinusoidalTendencies]

Couldn't find anything on ow to remove and instsll that pesky 2 piece turbo exhaust heat shield on my 850 so when I figured it out i made this video.



Apologies for not getting everything in the frame. Hopefully it's enough of the important parts for everyone to follow..

[Ozark Lee]

That will be very helpful to many. That heat shield is never intuitive.

...Lee

[KHolden]

Fwiw, on my '98 V70 GLT the bolt pattern was the large spring loaded bolt on the lower passenger side and the smaller spring loaded bolt on the upper brace support. The regular bolts went in the other three. Pretty sure the spring loaded bolts are to dampen any rattle.

[SinusoidalTendencies]

Fwiw, on my '98 V70 GLT the bolt pattern was the large spring loaded bolt on the lower passenger side and the smaller spring loaded bolt on the upper brace support. The regular bolts went in the other three. Pretty sure the spring loaded bolts are to dampen any rattle.

i believe you are right about that...the upper and lower position on those bolts is probably interchangeable, and likely get mixed up at times.
this apparently applies to many turbo models.. dunno if you can tag it to come up for other matching turbo set ups Mathew.

back on the forums again. Got the xc i've always wanted finally - 99 v70 xc turbo . it's so sweet. learning a slew of new stuff now and need your cats help.

bless