IPD sale XeMODeX - Experts in Volvo Electronics

Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!

XC90 T6 cylinder head/turbo removal

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo XC90s. The XC90 proved to be very popular, and very good for Volvo's sales numbers, since its introduction in model year 2003 (North America).
Post Reply
Squirk
Posts: 2
Joined: Sun Oct 09, 2016 10:49 am
Year and Model: 2004 XC90 T6
Location: Australia

XC90 T6 cylinder head/turbo removal

Post by Squirk »

Hi guys.

I have seen this question bouncing around on different pages, but I have no difinitive answer to my question... how do I get the turbos off of the T6? I'm almost at the stage of removing the heads but I can see brackets, oil and coolant lines and I'm not sure what the correct procedure is.

I guess my options are:

1) remove turbos then remove the head
2) disconnect the lines to the turbos and remove whilst still attached to the head

I've read people struggling to gain access to one of the oil lines - does the angle gear need to be removed?

Any help would be much appreciated! I have a snapped timing belt so I can give regular updates on the repair if anyone is interested?

Thanks.

Steve.
Post Reply
  • Similar Topics
    Replies
    Views
    Last post