2007 xc90 v8 serpentine belt replacement help

Pretribrapper · Post by **Pretribrapper** » Wed Jul 22, 2020 5:32 am

Hoping someone can give me some direction. Had an idler pulley go bad and serpantine belt broke. I replaced pulley but cannot get new belt on. I have tensioner as far as I believe I can get it to go and I seem to be about 1 inch short of being able to slide new belt over the final pulley. Is it possible belt is too short. Item number on belt matches part number I need for car...

Pretribrapper · Post by **Pretribrapper** » Wed Jul 22, 2020 7:24 am

Belt was an aftermarket 990K6 from Rock Auto. I am trying a different belt but not sure that is the issue....

YouTube · Post by **oragex** » Wed Jul 22, 2020 1:03 pm

May try compare the new belt with the broken one, otherwise look at each pulley to make sure the belt sits correctly centered on the pulley

Masscomguru · Post by **Masscomguru** » Wed Jul 22, 2020 6:08 pm

When I did mine, it kept getting hung up near the crank pulley, I had to remove the wheel and fit it there first. It’s easy for it to “feel” ok if not on correctly.

2000c70hpt · Post by **2000c70hpt** » Sat Jul 25, 2020 4:35 pm

The 5 cylinder belts are cake compared to the 3.2. Took me almost 3 hours to do mine on my 3.2. 10 minutes on my 2.3

Volvo Forum + help for owners

2007 xc90 v8 serpentine belt replacement help

2007 xc90 v8 serpentine belt replacement help

Re: 2007 xc90 v8 serpentine belt replacement help

Re: 2007 xc90 v8 serpentine belt replacement help

Re: 2007 xc90 v8 serpentine belt replacement help

Re: 2007 xc90 v8 serpentine belt replacement help