IPD sale XeMODeX - Experts in Volvo Electronics Free shipping all USA - Experts in Brakes
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

car won't start after completed cylinder head and timing belt replacement

Help, Advice, Owners' Discussion and DIY Tutorials on the Volvo S80 model. Sometimes called an "executive car", the S80 was and continues to be Volvo's top-of-the-line passenger car.
Jaz
Posts: 18
Joined: Mon Mar 19, 2018 12:57 pm
Year and Model: 2002 s80 2.9 non tur
Location: Bklyn new. York
Has thanked: 0
Been thanked: 8 times
United States of America
Jaz

Check for codes to see why car not starting

Post by Jaz » Wed Oct 17, 2018 7:49 am

I checked for any codes and it said ignition advance timing cylinder one circuit not set right something to that effect can someone please tell me what that means and did starter check it said check connection can ::) these issues be cause of car not starting please help
These users thanked the author Jaz for the post:
jsn9839

User avatar
SuperHerman
Posts: 1384
Joined: Mon Dec 01, 2014 1:28 pm
Year and Model: 2004 & 2016 XC90
Location: Minnesota
Has thanked: 0
Been thanked: 144 times
United States of America
SuperHerman

Re: car won't start after completed cylinder head and timing belt replacement

Post by SuperHerman » Wed Oct 17, 2018 11:14 am

Stop and check your timing. Sounds like it is not timed correctly. This will cause a non-start.

Once you have confirmed timing is correct proceed by checking your alternator and starter cables (plus any grounds you may have played with).

Report back - but I think you messed up on the VVT timing set.

Jaz
Posts: 18
Joined: Mon Mar 19, 2018 12:57 pm
Year and Model: 2002 s80 2.9 non tur
Location: Bklyn new. York
Has thanked: 0
Been thanked: 8 times
United States of America
Jaz

Re: car won't start after completed cylinder head and timing belt replacement

Post by Jaz » Fri Oct 19, 2018 11:28 am

i jst try to start car again did diagnostc it said crank is normal 11.5 volt 1oo%ms & 100% smethng else can' quite remember does that indicate the timing is good and don't think getting any sparks from plugs checked cylinder 1&2 all other connections seem to be tightly connected sensors also told me to charge battery what the issue for not starting

User avatar
RickHaleParker
Posts: 3972
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 492 times
United States of America
RickHaleParker

Re: car won't start after completed cylinder head and timing belt replacement

Post by RickHaleParker » Fri Oct 26, 2018 12:29 am

Jaz wrote:
Mon Oct 15, 2018 8:20 pm
I meant flooding
Check the fuel line to the fuel rail. The retainer plate on my 2.9 bent under pressure and started leaking.
These users thanked the author RickHaleParker for the post:
jsn9839
--------
Platform: P80 1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.
Platform: X40 (Nedcar) 2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0, Plant Torslanda Sweden.
Platform P2 2004 S60R, B2524T4, AW50/51 AWD, Bosch Motronic 7.0, BorgWarner K24 turbocharger, Plant Ghent Belgium.

Jaz
Posts: 18
Joined: Mon Mar 19, 2018 12:57 pm
Year and Model: 2002 s80 2.9 non tur
Location: Bklyn new. York
Has thanked: 0
Been thanked: 8 times
United States of America
Jaz

Re: car won't start after completed cylinder head and timing belt replacement

Post by Jaz » Fri Oct 26, 2018 2:36 pm

ok will do cause yesterday redid the camshaft timimg marks as well the crank shaft check for sprarks from plugs positive gttin fire recheck all connections every thing connected same as taken off and all wire plugs fully tight connected really discourage rght now jst want to hear my car start up its a great car and was running perfect before i let the belt from serpertine get mess up and that got caught up in the timing pulleys i look on top of gas rail on intake manifold but really did not knw wht was looking for can u tell exactly how the retainer plate lookif u hav a image would be great help

Jaz
Posts: 18
Joined: Mon Mar 19, 2018 12:57 pm
Year and Model: 2002 s80 2.9 non tur
Location: Bklyn new. York
Has thanked: 0
Been thanked: 8 times
United States of America
Jaz

Re: car won't start after completed cylinder head and timing belt replacement

Post by Jaz » Fri Oct 26, 2018 2:55 pm

rght now i didn't put the serpertine bck on got depress can the car start up wth out it and should i not try to start it to bck up to i put belt bck on

User avatar
RickHaleParker
Posts: 3972
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 492 times
United States of America
RickHaleParker

Re: car won't start after completed cylinder head and timing belt replacement

Post by RickHaleParker » Sat Oct 27, 2018 12:20 am

Jax: We have posting standards at MVS.

If its not worth your time time to write it clearly. Why should anybody else invest time in it .....
--------
Platform: P80 1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.
Platform: X40 (Nedcar) 2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.
Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0, Plant Torslanda Sweden.
Platform P2 2004 S60R, B2524T4, AW50/51 AWD, Bosch Motronic 7.0, BorgWarner K24 turbocharger, Plant Ghent Belgium.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post