ETM rebuilt unit issue Topic is solved

michalz · Post by **michalz** » 10 Dec 2017, 12:53

Hi All!
Last days I have changed ETM in my car. I had some error codes with ETM and my mechanic was sure that it is Magneti Morelli faulty
ETM issue. So I have bought a rebuilt unit from the professional workshop. The car is running almost perfect, but after it catches a
proper temperature it has some strange idle behavior. It is hard to tell, so please find below two links which will take to YT.
The first situation is when I am going to stop before the lights and second is on the stop while I am moving the steering wheel.

I was wondering is it a case that I need to do something with car computer settings like some upgrade or set higher idle rpm's? Maybe
the ETM wasn't rebuilt correctly? Please share your thoughts.

Thanks

,
Michal

Post by **RickHaleParker** » 10 Dec 2017, 13:10

The ECM may be relearning the ETM. Take it out and drive it for 50 - 100 km, see if it clears up.

michalz · Post by **michalz** » 11 Dec 2017, 01:11

Since change I have made around 300km and still the same.

ps. by mistake I have made post as solved but it isn't, can someone change it?

Post by **RickHaleParker** » 11 Dec 2017, 06:03

can someone change it

On your end you should see a red check mark, click to set topic unsolved.

You might try cleaning out the Idle Air Control valve (ICA)

michalz · Post by **michalz** » 12 Dec 2017, 06:16

I do not have any red mark. This model doesnt have IAC valve, it is integrated with ETM.