IPD sale Volvo Parts Volvo Parts guaranteed for life Volvo Parts

when buying a used ETM what will work without a reprogram?

Do you have a failing Electronic Throttle Module? What steps to take if you do, plus the latest ETM news. Volvo 1999-2002 models only please.
regent
Posts: 1176
Joined: Mon Feb 22, 2010 6:34 pm
Year and Model: 2002 S60 2.4
Location: USA
United States of America

Re: when buying a used ETM what will work without a reprogra

Post by regent » Tue Aug 26, 2014 11:39 am

Then, if you don't like the fun of intake removal to do the PCV, you wouldn't buy a Bimmer either, what a pity! :lol:


Example of Precision: Measure with a Micrometer, mark it with Chalk, and then cut it with an Axe.
Disclaimer: We (very) seldom do that

2002 S60 2.4 non-turbo - lovely!
1987 340 DL (with the 4-cyl N/A Renault Diesel engine, 5-speed manual, RWD) - sold (I wish I did not have to...)

Cal1972
Posts: 1
Joined: Sun May 08, 2016 11:04 am
Year and Model: 2001 S80 t6
Location: Usa
United States of America

Re: when buying a used ETM what will work without a reprogra

Post by Cal1972 » Sun May 08, 2016 11:13 am

doublebug wrote:Supposed that you have DiCE.
I will give you my program that shares DiCE via internet.
You install new ETM but connect to the socket an old one.
Connecting DiCE to the car.
Plug to laptop. (Off course it should have internet connection)
Initiate connection to my server.
I will read firmware.
You connect new ETM to the socket.
I will save it's firmware too.
After that I will upload software from your old ETM.
You can check how car is working.
I can check using VIDA if there is any error codes stored and clear them.
So everything is doable.

If you decide that new ETM does not help I will restore it's firmware and you can return it back.

Just ensure that you have fully charged good battery before starting.
Hi Doublebug do you have the software to reprogram 2001 S80 t6 ETM? I bought a used one they say it needs to be reprogrammed thanks



doublebug
Posts: 343
Joined: Fri Jul 19, 2013 6:08 am
Year and Model: XC90 2007 D5
Location: Belarus
Belarus

Re: when buying a used ETM what will work without a reprogram?

Post by doublebug » Mon May 09, 2016 3:44 am

If you have and old one that worked properly in the past I can transfer software.
Or post your ECM software numbers and I will check my database.


If you have questions about Volvo firmware ask me. I may know an answer :)

Post Reply

Return to “The ETM Room”

Who is online

Users browsing this forum: No registered users and 1 guest