IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

Coolant line from block Topic is solved

Help, Advice, Owners' Discussion and DIY Tutorials for the groundbreaking new Volvo S60 2011+, V60 2015+ XC60 2010-2018.
GoLuckydog
Posts: 9
Joined: Fri Jul 03, 2015 10:27 am
Year and Model: xc60 2010
Location: Connecticut
Has thanked: 1 time
Been thanked: 0
United States of America
GoLuckydog

Coolant line from block

Post by GoLuckydog » Sun May 17, 2020 6:46 am

I have a XC60 T6 3.0 I am trying to figure out what this coolant hose is called to get a new one. On passenger side, It is a fitted hose with a clamped end and a screwed in fitting. From block and goes to the the other side of the oil filter. Its probably 5-6" long kinda "S" shaped i cant find one online to order by name. My daughter wss driving home and it blew out. Sorry i dont know how to put a picture up but is similar in design to Coolant Hose - 30713530

Thanks for any help

User avatar
pgill
Posts: 272
Joined: Mon Aug 27, 2018 5:42 pm
Year and Model: 2010 S80, 2008 LR2
Location: California
Has thanked: 23 times
Been thanked: 42 times
United States of America
pgill

Re: Coolant line from block  Topic is solved

Post by pgill » Sun May 17, 2020 8:57 pm

Take a look at this link

https://www.freel2.com/forum/topic32245.html

I believe the hose you are looking for is (part numbers are from Land Rover)

LR001442 - Coolant Hose for heat exchanger

LR000491 - Bolt for Heat exchanger hose

LR001505 - O-Ring for heat exchanger hose

You will need the hose and the O ring

If you prefer to buy the part in a Volvo box

Then use this part number 30713530

I don’t know the part number for the O ring from Volvo

Which is why I just buy the Land Rover part

I did change this hose and O ring on my S80 and LR2 (before it started leaking)


Good luck

Paul
These users thanked the author pgill for the post:
GoLuckydog

GoLuckydog
Posts: 9
Joined: Fri Jul 03, 2015 10:27 am
Year and Model: xc60 2010
Location: Connecticut
Has thanked: 1 time
Been thanked: 0
United States of America
GoLuckydog

Re: Coolant line from block

Post by GoLuckydog » Mon May 18, 2020 11:15 am

Thank you Paul. THAT is the exact hose I had mentioned above! Weird that the site I went to previously to purchase said it was for a different engine code. I must not have read the VIN right.
Thanks Again
Mike

User avatar
pgill
Posts: 272
Joined: Mon Aug 27, 2018 5:42 pm
Year and Model: 2010 S80, 2008 LR2
Location: California
Has thanked: 23 times
Been thanked: 42 times
United States of America
pgill

Re: Coolant line from block

Post by pgill » Mon May 18, 2020 4:32 pm

Mike,

It's not that hard to replace.

Just remember to remove the old O-ring and plastic pieces from the engine block.

This is a common failure point on the 3.2 and 3.0T

I plan to replace mine every 10 years or every 100,000 miles.


You should also be thinking about replacing the Thermostat because it has a similar lifetime to the coolant hose that failed on your XC60.



Good Luck

Paul


2010 S80 3.2
2008 LR2 3.2

GoLuckydog
Posts: 9
Joined: Fri Jul 03, 2015 10:27 am
Year and Model: xc60 2010
Location: Connecticut
Has thanked: 1 time
Been thanked: 0
United States of America
GoLuckydog

Re: Coolant line from block

Post by GoLuckydog » Mon May 18, 2020 8:37 pm

Ive replaced the thermostat last year. The metal factory band slid off the hose. I will make sure everything comes out. I only plan on having the car maybe 2 more years. After my daughter finishes her masters program. The csr has a lot of highway miles, my wife,her old car, is in sales, just gotta get it thru a little longer. Thanks for the tips ive ordered the hose and O-ring today.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post