I recently bought running boards for my wife 2011 XC60. The local dealer wants $300 to install them; I consider myself a do it yourself type of person and I have an engineering background. So I reviewed the instructions and have one question about step 16 that limiting me from starting this project. They call for a tool 9512782 (Rivet tool) but by the looks it does not appear to be a rivet. I looked at the "revit" and theres no internal rod too clamp the two side together. I can see the tool expanding the rivet inside the hole either. After studying this more I think its only a tool to assist in hammering/press the fitting into the bottom sill. Can anyone verify that I don't need this tool and using some simple tools is all you need like a hammer or c-clamp to press it in.
"Take four rivet nuts from the kit and tighten in the drilled holes in
the sill. Use tool 9512782"
Help, Advice, Owners' Discussion and DIY Tutorials for the groundbreaking new Volvo S60 2011+, V60 2015+ XC60 2010-2018.
1 post • Page 1 of 1
- Similar Topics
- Last post