IPD sale XeMODeX - Experts in Volvo Electronics
MVS-Amazon link helps MVS!

Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!

2010 xc60 idler shaft to alternator is loose

Help, Advice, Owners' Discussion and DIY Tutorials for the groundbreaking new Volvo S60 2011+, V60 2015+ XC60 2010-2018.
Post Reply
Paulii
Posts: 3
Joined: Tue Mar 10, 2009 10:11 am
Year and Model: 2011 xc60 3.2
Location: VA

2010 xc60 idler shaft to alternator is loose

Post by Paulii »

Dive pulley is wobbling for A/c drive and alt. shaft input Can't find a answer to repair. I have taken the motor down to the cover, but lack the special tools for gear holding inside the cover. also need special tool for the pulley removal. What bearing is needed for the shaft, can't seem to find one listed. Man do I nee help! 218,000 miles xc60 3.2
User avatar
pgill
Posts: 386
Joined: Mon Aug 27, 2018 5:42 pm
Year and Model: 2010 S80, 2008 LR2
Location: California
Has thanked: 29 times
Been thanked: 46 times

Re: 2010 xc60 idler shaft to alternator is loose

Post by pgill »

Paulii,

The 3.2 is a very reliable engine

And it is shared by Volvo and Land Rover.

Here is a Land Rover forum post that shows the bolt that can become loose

https://www.aulro.com/afvb/freelander-2 ... owner.html

This post from a different Land Rover board shows how to take off the manifold an expose the Alternator

https://www.freel2.com/forum/topic32245.html

While you are in there you should replace the Thermostat, small coolant hose and O-ring

This post has the part number for OAP (Overdrive Alternator Pulley) and a picture of the special tool need to replace it

https://www.freel2.com/forum/topic33867.html

Let me know if this answers your questions

Thanks

Paul
Post Reply
  • Similar Topics
    Replies
    Views
    Last post