IPD sale Volvo Parts
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

2001 S40 Key Casing Cracked and Key fell out

Help, Advice, Owners' Discussion and DIY Tutorials on S40 and V40. In this forum you'll find S40/V40-specific owners asking and answering questions on maintenance, ownership, repairs, tutorials and almost every do-it-yourself thing you can do to save money owning these Volvos.

1996 - 2004 S40
1996 - 2004 V40

cjfla
Posts: 1
Joined: Mon Dec 09, 2013 8:42 pm
Year and Model: S40 2001
Location: Florida
Has thanked: 0
Been thanked: 0
cjfla

2001 S40 Key Casing Cracked and Key fell out

Post by cjfla » Mon Dec 09, 2013 9:03 pm

Hello,

My fob quit working many months ago and was never replaced. I started using the key to open the door.

I find it hard to describe what happened so please excuse any errors. The metal part of the key appears to be intact. The plastic part that the metal fits into is cracked a bit which made the metal come loose or out of the plastic casing. '

The metal part will not slide back into exact place so it can be super glued and will not open the car door at all. The key will however start the car by placing the metal key into the ignition then sliding the plastic casing over the end and CAREFULLY turning the key. I know this will not last long.

I am wondering what if anything can be done without going to the dealer? I have the key and the casing but have exhausted all efforts to locate online what it is needed to repair. Everything I have found online is the switchblade type or does not give enough description.

There are several fob casings found, it would be nice if I could find something like this for my situation as long as the casing could be pried open and the chip?/transponder? carefully removed.

Thanks in advance for all suggestions.



pmondrian
Posts: 16
Joined: Fri Jul 19, 2013 4:34 pm
Year and Model: S40, 2001
Location: Princeton
Has thanked: 0
Been thanked: 0
pmondrian

Re: 2001 S40 Key Casing Cracked and Key fell out

Post by pmondrian » Mon Sep 03, 2018 12:56 pm

Did you ever find a solution? I'm facing this problem now. Thanks.



User avatar
alschnertz
Posts: 566
Joined: Fri Apr 29, 2011 9:25 am
Year and Model: 1995 854T
Location: Connecticut
Has thanked: 1 time
Been thanked: 7 times
United States of America
alschnertz

Re: 2001 S40 Key Casing Cracked and Key fell out

Post by alschnertz » Mon Sep 03, 2018 4:09 pm

The original post is a little confusing.
At first it references the "fob". Which I've understood to be the dangling piece that unlocks the doors.

Later in the post it seems to refer to the plastic portion of the key. That confuses me.

Regardless, I was able to find a replacement "fob" housing on eBay for cheap.
Hopefully, that's all you need.


'60 PV544, '68 220, '70 145S, '86 745T, '95 854T, '01 S40
'84 Prelude
'06 MPV
'13 Ford Focus SE

User avatar
RickHaleParker
Posts: 2761
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 305 times
United States of America
RickHaleParker

Re: 2001 S40 Key Casing Cracked and Key fell out

Post by RickHaleParker » Mon Sep 03, 2018 11:37 pm

Pmondrian, do you have the switch blade (combination key and remote) or the separate key and remote?


Platform: P80 1998 C70, B5234T3, AW50-42, Bosch Motronic 4.4, Special Edition package, Plant: Uddevalla Sweden.

Platform: X40 (Nedcar) 2003 S40, B4204T3, AW55-50/51SN, Siemens EMS 2000. Plant: Born Netherlands.

Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0, Plant Torslanda Sweden.
----------------------------------------------------------------
1997 S90, B6304S, AW30-42, Bosch Motronic 4.4 - Sold

Post Reply