Kallekula's 2001 Wagon Relapse Topic is solved

Post by **kallekula** » 07 Mar 2019, 07:38

Bonus pic of old bent intake valves:

Post by **kallekula** » 20 Mar 2019, 09:05

Cleaned Pistons and block mating surface:

Post by **kallekula** » 13 Apr 2019, 20:03

Head bolted back on. Gasket is Fel-Pro, managed to screw up the Reinz when I tried to put the head on with turbo and manifold

. Note my cool pink converter!

Post by **kallekula** » 22 Apr 2019, 12:22

Little bit of work Done over the weekend. Mounted exhaust manifold and turbo and hooked it all up. Old yucky turbo vacuum hoses replaced with silicones

Post by **abscate** » 22 Apr 2019, 13:46

Be careful with those valves if you start gnawing on them. Turbo valves are sodium filled - which can be a lot of fun to play with.

Post by **kallekula** » 05 May 2019, 20:38

Car done

. Started up without problem but ran rough. Swapped out one ignition coil that was bad.

Post by **abscate** » 05 May 2019, 21:06

Looking good. Spent last week in the OC, should have looked you up and come messed up your ETM like I did with Evan.

Post by **kallekula** » 06 May 2019, 01:27

abscate wrote: 05 May 2019, 21:06 Looking good. Spent last week in the OC, should have looked you up and come messed up your ETM like I did with Evan.

Next time

Post by **kallekula** » 08 May 2019, 07:31

Transmission flushed

Post by **abscate** » 08 May 2019, 07:42

Hang another unit of Type 3309, Doctor.

+1000 points for the clever flush adapter
+ 6000 points for the zipties