IPD sale Volvo Parts
XeMODeX - Experts in Volvo Electronics My Swedish Parts ad - genuine Volvo parts
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy your stuff using this and it helps MVS!

2001 V70 2.4T bad ignition coil replacement...

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

MikeoldS60
Posts: 1
Joined: Mon Aug 08, 2011 5:53 am
Year and Model: S60 2002
Location: not far
Has thanked: 0
Been thanked: 0
MikeoldS60

Re: 2001 V70 2.4T bad ignition coil replacement...

Post by MikeoldS60 » Thu Aug 11, 2011 7:57 am

Thanks, really. The very detailed pictures and instructions helped me change all my plugs. I enjoyed the work and the money I saved. I wouldn't have done it without having seen these pictures.
Thanks



trackminer
Posts: 36
Joined: Wed Jul 27, 2011 10:10 pm
Year and Model: 1999 S70, 1986 244
Location: South Carolina
Has thanked: 0
Been thanked: 0
trackminer

Re: 2001 V70 2.4T bad ignition coil replacement...

Post by trackminer » Thu Aug 11, 2011 8:12 am

Awesome post Sir!


...pullin' off slow - in a VOLVO...

Lead Chalcogenide
Posts: 13
Joined: Wed Aug 03, 2011 8:28 am
Year and Model: 2001 XC70
Location: Denver, CO
Has thanked: 0
Been thanked: 0
Lead Chalcogenide

Re: 2001 V70 2.4T bad ignition coil replacement...

Post by Lead Chalcogenide » Fri Aug 12, 2011 12:07 pm

1911colt wrote: so I unplugged the MAF and the engine kept running, it should have died immediately,
Seriously? I have unplugged my MAF several times with no change to engine performance. I even drove about 1 mile (in a deserted parking lot) with the MAF unplugged. Maybe I need a new MAF as well. Thanks for the tip. :D Hoping this solves my problem.



Lead Chalcogenide
Posts: 13
Joined: Wed Aug 03, 2011 8:28 am
Year and Model: 2001 XC70
Location: Denver, CO
Has thanked: 0
Been thanked: 0
Lead Chalcogenide

Re: 2001 V70 2.4T bad ignition coil replacement...

Post by Lead Chalcogenide » Mon Aug 15, 2011 9:00 am

okay... no.

I went out an bought a new MAF based on this thread and no dice. I still have a major problem. So, in my case, (failed acceleration, or useless gas pedal), when I unplugged the MAF, it had no effect on my driveability, yet the MAF was fine. Just putting that out there for reference.



Prehagnew
Posts: 1
Joined: Mon Dec 26, 2011 5:14 pm
Year and Model: 2000 V70
Location: Idaho
Has thanked: 0
Been thanked: 0
Prehagnew

Re: 2001 V70 2.4T bad ignition coil replacement...

Post by Prehagnew » Mon Dec 26, 2011 5:22 pm

Thank You for the great instructions! Thanks to you, I'm mobile again after being "broke down" for 2 days. Take care!



baylorbrown
Posts: 10
Joined: Thu Apr 21, 2011 2:06 pm
Year and Model: V70 2000
Location: Arlington, TX
Has thanked: 0
Been thanked: 0
baylorbrown

Re: 2001 V70 2.4T bad ignition coil replacement...

Post by baylorbrown » Mon Apr 02, 2012 3:50 pm

Thanks. This write up was a huge help to me!
-Ryan



blueturfjunkie
Posts: 1
Joined: Mon Jul 09, 2012 10:10 pm
Year and Model: 1999 V70 wagon
Location: Ontario, OR USA
Has thanked: 0
Been thanked: 0
blueturfjunkie

Re: 2001 V70 2.4T bad ignition coil replacement...

Post by blueturfjunkie » Mon Jul 09, 2012 10:54 pm

Thank you! Like you said, the car wouldn't idle, 'it would, but rough', but I think the tell tale sign was the shaking steering wheel. At any speed. Except when decelerating. then it cleared up. Hit the gas, shaking wheel. Just that little bit of info was huge for me in diagnosing the problem, My V70 needed a new ignition coil. All I did was replace all spark plugs (Champion Double Platinum Power Premium Plugs), found the one that was wet, And viola! I knew exactly which coil to replace. $18.00 for plugs.$51.99 for coil, and the car runs like new. 118,000 on the wagon, Just acquired her three months ago, hope I didn't make a mistake. Several yellow lights staring at me.



Whitebird
Posts: 18
Joined: Tue Jun 14, 2011 2:35 pm
Year and Model: 1999 S70 Base manual
Location: Nashville, Tennessee
Has thanked: 0
Been thanked: 0
Whitebird

Re: 2001 V70 2.4T bad ignition coil replacement...

Post by Whitebird » Mon Jul 16, 2012 3:24 pm

Wonderful tutorial with great pictures. I want to chime in to say, 'Thank you' to E170_Driver and to confirm that these instructions for changing plugs and coils work for the 1999 S70 (non-Turbo) as well.



mtnjones
Posts: 1
Joined: Mon Aug 06, 2012 8:14 am
Year and Model: XC90, 2004
Location: Brevard, NC
Has thanked: 0
Been thanked: 0
mtnjones

Re: 2001 V70 2.4T bad ignition coil replacement...

Post by mtnjones » Mon Aug 06, 2012 8:21 am

Wish we had done this sooner. Couldn't believe how easy it was to replace all five coils. (I wasn't taking a chance on just doing one). Car started up this morning without the check engine light on. We couldn't have done it without your help!



ONV70XC
Posts: 135
Joined: Wed Jul 18, 2012 10:21 am
Year and Model: 1999 V70 XC
Location: North Carolina
Has thanked: 0
Been thanked: 0
ONV70XC

Re: 2001 V70 2.4T bad ignition coil replacement...

Post by ONV70XC » Wed Sep 05, 2012 3:00 pm

All 5 is a-bit of a financial stretch especially if buying OEM. which aftermarket one did you choose if you did? At first symtoms of bad ignition coils I cut the 'skirt' from bottom approx 7mm just right above the 'shoe' so it doesn't touch the plug's chassis. It prolongs life to about 6000mi extra.



Post Reply