IPD sale XeMODeX - Experts in Volvo Electronics

Get email notification of topic replies. Log in or register (free). Amazon Link Buy anything with this and it helps MVS!

HELP! 2007 Volvo S60 2.5T into 2004 Volvo S60 2.4 Interior Swap Help! Request

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

Post Reply
hersch
Posts: 1
Joined: Sat Aug 25, 2018 8:12 pm
Year and Model: 2004 Volvo S60 2.4
Location: USA

HELP! 2007 Volvo S60 2.5T into 2004 Volvo S60 2.4 Interior Swap Help! Request

Post by hersch »

All,
I have a 2004 Volvo S60 2.4 with cloth manual seats. I found a full set of leather electronic seats out of a 2007 Volvo S60 2.5T and was wanting to put them into my car. Before I do this I wanted to find out if this is possible. I know the bolts will matchup for the seat rails. My concerns come in with adding electric seat to one that does not have them and if the wiring does not matchup, can I just put a seat module from the 01-04 seats? Below is a full list of what I want to put into my 04 from the 07, can someone please tell me if each part will work or not and if modification is required, what is required. Thank you in advance! -- Hersch

Interior Door Panels
Full Leather electric seat set (heated seats, so I assume that I need the buttons on the dash and wiring?)
Center console (Cup holder and jockey box)
E-Brake handle with boot
Trim around gear shifter (Taking out of automatic and putting into manual, 5-Speed)
Trim around radio
Trim on dash Jockey box
User avatar
darylrobert
Posts: 156
Joined: Tue Jul 13, 2010 11:16 pm
Year and Model: V70 240 740t xc70
Location: Australia
Been thanked: 1 time

Re: HELP! 2007 Volvo S60 2.5T into 2004 Volvo S60 2.4 Interior Swap Help! Request

Post by darylrobert »

It can be done all the wiring should be there but you have to get the module programmed by Volvo i hear or just use DPDT relays and rewire the factory switches direct to the relays. i used 8 relays in total 2 for each motor so they have to be micro relays more than 2amp
micro relay.jpg
micro relay.jpg (9.05 KiB) Viewed 225 times
Post Reply
  • Similar Topics
    Replies
    Views
    Last post