Door Lock Cylinder Not Responding Topic is solved

[MoVolvos]

Should I go to the stealership and see if they can give me a little plastic piece?

-

Is the piece somewhere down in the door abyss? Unless someone has worked on it previously it should of just fell off.

[MoVolvos]

-

Scroll through to see if you recognize your part. At least if you call the dealer they can pull something up to check if they only carry that piece. There are a few more websites like this.

https://parts.volvocarslisle.com/produc ... oor%20lock

[MoVolvos]

-
See Also (EDIT Below)
-
Missing Bushing
https://parts.volvocarslisle.com/p/Volv ... 50337.html

While the unhinged hook goes into the hole with the arrow.
-

-
(EDIT)
Part Number 16 is the hook and should go into that hole. A little hard to tell but I think that's it.
https://parts.volvocarslisle.com/a/Volv ... 77502.html

[chris11211]

Is the piece somewhere down in the door abyss? Unless someone has worked on it previously it should of just fell off.

Yeah it'd down there. what do you want me to do with it? Glue it on?

[MoVolvos]

Is the piece somewhere down in the door abyss? Unless someone has worked on it previously it should of just fell off.

Yeah it'd down there. what do you want me to do with it? Glue it on?

-

If you don't have time to pick one up ($2~3) and if it's not too broken up or worn you can try gluing it. Need to clean it well with alcohol (90% plus is best) and make sure it's completely dry before applying some kind of exterior glue.

[chris11211]

UPDATE!!!

I just bought and put in two bushings for the holes and installed it just now. Door works 100% and it only cost almost 2 bucks a piece. THANKS!!!!

[MoVolvos]

UPDATE!!!

I just bought and put in two bushings for the holes and installed it just now. Door works 100% and it only cost almost 2 bucks a piece. THANKS!!!!

OK.png (11.76 KiB) Viewed 243 times