IPD sale XeMODeX - Experts in Volvo Electronics
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link Buy anything with this and it helps MVS!

Air intake sensor question

Help, Advice, Owners' Discussion and DIY Tutorials on Volvo's stylish, distinctive "P2" platform cars.

2001 - 2007 V70
2004 - 2007 V70 R
2001 - 2007 XC-70
2001 - 2009 S60
2003 - 2007 S60 R

Beardking
Posts: 2
Joined: Fri Sep 20, 2019 6:41 am
Year and Model: 2004 v70
Location: WA
Has thanked: 0
Been thanked: 0
United States of America
Beardking

Air intake sensor question

Post by Beardking » Fri Sep 20, 2019 7:40 am

Hello all. So I've got a 2004 V70 2.4 non turbo that threw a p0113 code for the air intake sensor. My question is where is this located. Looking this up Ive found that some say it's the MAF located on the intake tube next to the air box. But the new sensor is not the same. Does anyone have a pic of where it is located? Thanks in advance.

User avatar
RickHaleParker
Posts: 4373
Joined: Mon May 25, 2015 2:30 pm
Year and Model: See Signature below.
Location: Kansas
Has thanked: 3 times
Been thanked: 556 times
United States of America
RickHaleParker

Re: Air intake sensor question

Post by RickHaleParker » Tue Sep 24, 2019 4:35 am

Post a picture of the new IAT sensor and the part number.
I found an entry in VIDA that identifies the coolant temperature sensor as the IAT. :?:
--------
Platform: P80 1998 C70, B5234T3, 16T, AW50-42, Bosch Motronic 4.4, Special Edition package.
Platform: X40 (Nedcar) 2003 S40, B4204T3, 14T twin scroll AW55-50/51SN, Siemens EMS 2000.
Platform P2 2005 XC90 T6 Executive, B6294T, 4T65 AWD, Bosch Motronic 7.0.
Platform P2 2004 S60R, B2524T4, AW50/51 AWD, B8444S TF80 AWD, Bosch Motronic 7.0, BorgWarner K24 turbocharger. V8 conversion in progress.

User avatar
oragex
Posts: 4879
Joined: Fri May 24, 2013 6:20 am
Year and Model: S60 2003
Location: Canada
Has thanked: 97 times
Been thanked: 275 times
Contact:
Canada
oragex

Re: Air intake sensor question

Post by oragex » Tue Sep 24, 2019 7:25 am

Fcp sells the whole assembly, it's an entire section of the air tube, the MAF and IAT sensors are a piece inserted into this tube, you can either swap the whole tube section, or just remove the MAF/IAT part and swap it with the one in your car. https://www.fcpeuro.com/products/volvo- ... 12#fitment

Before replacing anything, I recommend inspecting the cables near the connector, and cleaning the IAT sensor with a wet q-tip as it often times gets covered with dirt

Post Reply
  • Similar Topics
    Replies
    Views
    Last post