Dear people,
Our recently purchased 460 automatic tries to get rid of its rear bumper.
The left side is hanging loose.
From beneath, i cannot see how it is, or should be mounted. But i can see the stud/bracket where i think it is supposed to be mounted on, but do not see the possibility how..
I can try gleuing but now it is too cold to harden..
Maybe first the plastic stuff has to be removed to acces a mounting thingy?
Is there a way to remove the plastic without breaking it apart like some people already have done, as can be seen by the broken plastic 'clips'?
Did you know? 🤔
Logged in users can get email notification of topic replies Log in or register (free).
Logged in users can get email notification of topic replies Log in or register (free).
Amazon Link
Buy your stuff using this and it helps MVS!
rear bumper 460 1990 (dis)mounting
- billofdurham
- MVS Moderator
- Posts: 6507
- Joined: Thu Feb 02, 2006 3:31 pm
- Year and Model: 855, 1995
- Location: Durham, England
- Has thanked: 0
- Been thanked: 3 times
Re: rear bumper 460 1990 (dis)mounting
Welcome to Matthew's Volvo Site.
This is the only information I have on the rear bumper removal for the 400 series.
Unfortunately it isn't too clear in the .pdf but if you have any further questions on it feel free to ask.
Bill.
This is the only information I have on the rear bumper removal for the 400 series.
Unfortunately it isn't too clear in the .pdf but if you have any further questions on it feel free to ask.
Bill.
You do not have the required permissions to view the files attached to this post.
Work was good - retirement is better.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
-
- Posts: 18
- Joined: Sun Dec 13, 2009 6:28 am
- Year and Model: 460 1990
- Location: netherlands
- Has thanked: 0
- Been thanked: 0
Re: rear bumper 460 1990 (dis)mounting
Look like a total other car..
Can anyone tell me what 'wheel arc liners' are??
Also, i cannot see how the bumper is attached to the car.
I guess it will be a case of clipping away the plastic rubbish an get the welding device outside..
Can anyone tell me what 'wheel arc liners' are??
Also, i cannot see how the bumper is attached to the car.
I guess it will be a case of clipping away the plastic rubbish an get the welding device outside..
- billofdurham
- MVS Moderator
- Posts: 6507
- Joined: Thu Feb 02, 2006 3:31 pm
- Year and Model: 855, 1995
- Location: Durham, England
- Has thanked: 0
- Been thanked: 3 times
Re: rear bumper 460 1990 (dis)mounting
That information is for the '90 460 and came from the Volvo Aftersales Diagnostics and Information System (VADIS). Unfortunately, the diagrams aren't very clear so I am trying to find something better.
In the meantime to remove the bumper you need to remove the wheel arch liners (see below). The bumper is held in place by 4 x nuts, 2 underneath the car and 2 in the boot. The bumper comes off complete and the later instructions are for dismantling the plastic cover from the metal member.
"Wheel arch liners" are the plastic liners in the wings or mudguards of the car. They are there to prevent a build-up of dirt/water on the metal parts of the wings.
This attachment has the parts list for front and rear bumpers which may make it clearer for you. Page 4 shows the wheel arch liner at part #1.
Bill.
In the meantime to remove the bumper you need to remove the wheel arch liners (see below). The bumper is held in place by 4 x nuts, 2 underneath the car and 2 in the boot. The bumper comes off complete and the later instructions are for dismantling the plastic cover from the metal member.
"Wheel arch liners" are the plastic liners in the wings or mudguards of the car. They are there to prevent a build-up of dirt/water on the metal parts of the wings.
This attachment has the parts list for front and rear bumpers which may make it clearer for you. Page 4 shows the wheel arch liner at part #1.
Bill.
You do not have the required permissions to view the files attached to this post.
Work was good - retirement is better.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
-
- Posts: 33
- Joined: Wed Nov 25, 2009 6:52 am
- Year and Model: 460 1997
- Location: UK Sheffield
- Has thanked: 0
- Been thanked: 0
Re: rear bumper 460 1990 (dis)mounting
Hi, saw this on an e-bay trawl this morning, not sure if it wil lhelp:
http://cgi.ebay.co.uk/Volvo-GENUINE-New ... 3a55cbae22
Tom
http://cgi.ebay.co.uk/Volvo-GENUINE-New ... 3a55cbae22
Tom
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Bumper and Bumper Cover Interchange 1998 v90
by mike: » Sat Apr 08, 2017 2:04 pm » in 240, 740, 760, 780, Bertone, 940, 960, V90, S90 - 0 Replies
- 221 Views
-
Last post by mike:
Sat Apr 08, 2017 2:04 pm
-
-
-
Rear Caliper 10mm or 11mm mounting holes..? 5003813 5003814
by BlackBart » Wed Oct 02, 2019 10:43 am » in Volvo 850, S70, V70, C70, XC models 1992-2000 - 21 Replies
- 325 Views
-
Last post by BlackBart
Mon Oct 21, 2019 12:47 pm
-
-
-
Rear Bumper Cover, Front Passenger Door Shell, & Rear Right Lower Lense
by Oka » Thu Mar 17, 2016 4:10 pm » in Volvo V70 & XC-70 2001-2007, S60 2001-2009 - 0 Replies
- 294 Views
-
Last post by Oka
Thu Mar 17, 2016 4:10 pm
-
-
- 1 Replies
- 3120 Views
-
Last post by 93Regina
Tue Mar 08, 2016 11:12 am