Parting out 1999 Volvo S80 T6 + Aftermarket Parts

JVC · Post by **JVC** » 17 Jul 2010, 00:00

1999 Volvo S80 T6, White with light gray interior, and I have most of a black interior also (just missing dash pad and carpet)
Engine has 122k on it, all oil changes done between 3k and 3.5k miles apart. Mobil 1 only.
Exterior is good, there are some dings all over, I think the car might have been in a hail storm before I bought it but nothing is horribly smashed.
Interior is pretty clean both black and gray.

The car got a new transmission from AAMCO 4 days before it had a major electrical failure and blew the ECU and took out a bunch of sensors with it also. The cost of the repair was going to be more than I could afford since the problem was purely electrical and required replacing many sensors. So I decided to part out the car, I know I'm taking a loss but it's the easiest way to get rid of the car. If you happen to have an S80 that just needs a transmission then you can buy the one that I just put way too much money into to rebuild and put that in another S80 and have a perfect car. There are many S80's out there for $500-$1000 with blown transmissions and if you bought the transmission that I have for sale then you have a full working car with a brand new transmission for under $3k.

Eibach Springs (will fit 2001+ S60, V70, and 1999+ S80 FWD only) - $175
IPD Sway Bars (will fit 2001+ S60, V70, and 1999+ S80, FWD only) - $300
IPD Endlinks Front HD (will fit 2001+ S60, V70, and 1999+ S80) - $45
Monroe Shocks and Struts (will fit 2001+ S60, V70, and 1999+ S80, FWD only) - $150
Heico Mesh Grille (fits 1999-2002 S80) - $70 (no one really makes a grille for this car anymore, so this is a fairly rare item)
3" Cat Back Straight Pipe Exhaust (fits S80, might fit S60 and V70 FWD if you cut it slightly shorter) - $50
1999-2002 S80 Tinted Taillights (one chip out of the drivers side taillight) - $75
4t65ev-gt (S80 T6) Transmission rebuilt by AAMCO less than 100 miles ago - $2000 (the rebuild cost just under $3000 so you're benefiting from my loss.
Volvo Factory Roof Bars for 1999-2002 Volvo S80 with the bolt holes in the roof strips for mounting - $80

All above prices are + shipping (if necessary) and OBO.

If you want detailed pictures of anything listed above or of any part from the car please email me and I will send you more detailed pictures. [email protected]

-John

Things that are already off of the car.

Coil Packs
Fuel Rail/Injectors
Power Steering Lines
AC Components
Intercooler
Headlights
Taillights
Corner Lights
Front and Rear Bumpers
AC Compressor
Power Steering Pump
Alternator

JVC · Post by **JVC** » 20 Jul 2010, 00:51

650+shipping for the Eibachs, Monroes, IPD Sways, and IPD Endlinks
525+shipping for the Eibachs, IPD Sways and IPD Endlinks

Trying to get someone with a FWD P2 a really nice suspension setup for a killer deal.

Engine is out of the car so if theres anything you want from the engine bay or under the car let me know!
-John

JVC · Post by **JVC** » 23 Jul 2010, 00:56

Still have everything for sale for the most part. I'm just trying to get rid of parts so feel free to make an offer which you think is fair and I can work with you to get the parts out of my garage and into your hands!

-John

JVC · Post by **JVC** » 27 Jul 2010, 20:29

$450 for the Eibachs and Sways+shipping, I had to cut the endlinks since they were too rusted/stripped on there.

Don't forget both the springs and sways will work on and FWD P2!

-John

JVC · Post by **JVC** » 29 Jul 2010, 19:25

ETM, SRS Sensor, ABS Module, and CEM Sold.

JVC · Post by **JVC** » 14 Aug 2010, 13:13

Still have tons of parts, let me know what you want, and make me an offer. Anything reasonable will not be declined!

Thanks!
-John

JVC · Post by **JVC** » 24 Aug 2010, 16:11

Car is disappearing in the next few days, so any glass/doors will be taken away if not spoken for.

$400 for the eibachs and sways+shipping
$125+shipping for the monroes.
$50 for the Heico mesh grille
$550 for the engine

Feel free to ask me about any other parts... at this point in time any offer will be accepted.

Thanks!
-John

jcrewman10 · Post by **jcrewman10** » 27 Aug 2010, 00:23

I would love the heico mesh grille. Please let me know how I can get in contact with you easier as I would like to pay for it and have it shipped out as soon as possible. Thanks

Mike

mirbel · Post by **mirbel** » 07 Sep 2010, 02:38

hello, if ipd sway bar and ipd endlink are still available, how much you want for it with shipping to california? Thank you very much.