Question not answered: chip to 1+ bar of boost fuel cut out?

NiksT5 · Post by **NiksT5** » 04 Nov 2010, 16:33

So my question (after hours of searching) is are there any chips out there or ecu flashes or whatever that actually take out the 1 bar of boost fuel cut out? I know that there are quite a few guys out there running high boost, maybe someone can help me out here.

Post by **JRL** » 04 Nov 2010, 16:46

Please re-phrase the question that it makes sense!

NiksT5 · Post by **NiksT5** » 04 Nov 2010, 17:24

Do any of the ecu Chips or reflashes actually take out the factory over boost limiter. In other words can you run more that 15psi?

Post by **JRL** » 04 Nov 2010, 18:34

Of course
My (IPD) chipped Gen 1s ran at about 17 with spikes to 18 or so

flyfishing3 · Post by **flyfishing3** » 12 Nov 2010, 11:17

sure, i'm set up for 1.2 bar, had the red line raised, the fuel cut off raised, the torque limiter removed in 1st and 2nd.

you can do anything you want if you get to the right people.

phenom9579 · Post by **phenom9579** » 16 Nov 2010, 21:04

All ECU flashes that I know of remove the factory fuel cut off. Haven't heard of one that doesn't.