Hey Guys I have access to a pick and pull that has a Plethora of Volvo's
I want to know what caliper brackets and 12" discs would bolt on to my 99 XC70.
What to use for bigger front brakes
-
jblackburn
- MVS Moderator
- Posts: 14043
- Joined: 8 June 2008
- Year and Model: 1998 S70 T5
- Location: Alexandria, VA
- Has thanked: 9 times
- Been thanked: 19 times
What size wheels does your XC have? If they're the 15" variety, the answer is none will fit under them.
Good luck finding the 12" variety in a junkyard - very few -70 series were equipped with them from the factory. If you can find a T5 SE (there aren't many) just laying around there, they should have them.
Good luck finding the 12" variety in a junkyard - very few -70 series were equipped with them from the factory. If you can find a T5 SE (there aren't many) just laying around there, they should have them.
'98 S70 T5
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
-
jblackburn
- MVS Moderator
- Posts: 14043
- Joined: 8 June 2008
- Year and Model: 1998 S70 T5
- Location: Alexandria, VA
- Has thanked: 9 times
- Been thanked: 19 times
My T5 came with them already - I don't know if they were a factory option or upgraded at some point or what on my particular car. I was surprised to find out it had them when I went to measure the brakes just to make sure.
Personally, I would never put used rotors on my car. Once you get the proper wheels that allow the calipers to fit under them, I would go the IPD route and buy the big brake kit that includes all of the hardware necessary. I think FCP might have a kit too, I can't remember.
Personally, I would never put used rotors on my car. Once you get the proper wheels that allow the calipers to fit under them, I would go the IPD route and buy the big brake kit that includes all of the hardware necessary. I think FCP might have a kit too, I can't remember.
'98 S70 T5
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
I wouldn't use used rotors either. I want to know really what car to get the caliper brackets from or brackets and calipers if diff than mine. I can source good slotted rotors locally as I have accounts with many parts places here where I am
-
jblackburn
- MVS Moderator
- Posts: 14043
- Joined: 8 June 2008
- Year and Model: 1998 S70 T5
- Location: Alexandria, VA
- Has thanked: 9 times
- Been thanked: 19 times
Calipers are the same. 2000 V70R's have them too - not sure about the 1999.
'98 S70 T5
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 18 Replies
- 2697 Views
-
Last post by URDRWHO
-
- 15 Replies
- 3836 Views
-
Last post by jblackburn






