Windshield Washer

Post by **jbo6924** » 20 Jan 2011, 08:01

Replaced the one way valves a short time ago and only get a trickle of fluid from the windshield sprayers. Is there something I'm not doing correctly? They worked fine until the valve went bad, now I get nothing to the front or back wipers.(washer fluid)
Jim

Post by **phat78ta** » 20 Jan 2011, 10:23

Are you sure you put it in the right way?

Lol.......

Post by **jbo6924** » 21 Jan 2011, 07:36

Pretty sure! But it never hurts to double check.

Post by **jblackburn** » 21 Jan 2011, 07:57

How many did you end up replacing? It sounds like pressure is still escaping somewhere. Here's the whole parts list for a V70. It looks like there's 3 multiple-way valves in the system.

neil wilton · Post by **neil wilton** » 21 Jan 2011, 13:04

blow the hoses out to as you check them as ive found over years of window washer fluid can set like concrete.but be care full no to blow the lines off in hiden areas.