I want to take off my '04 V70 R's ugly dealer decal. It's fading and ugly. I'm wondering if you have any secrets.
I noticed a dealer decal (or badge?) on the XC70 you have posted in the for sale subforum. Wondering if you take those off before you sell the cars, and how.
Hey JRL, ever peel off dealer stickers?
-
matthew1
- Site Admin
- Posts: 14478
- Joined: 14 September 2002
- Year and Model: 850 T5, 1997
- Location: Denver, Colorado, US
- Has thanked: 2654 times
- Been thanked: 1247 times
- Contact:
Hey JRL, ever peel off dealer stickers?
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
-
IVIUSTANG
- Posts: 562
- Joined: 14 February 2009
- Year and Model: 2006 XC70
- Location: Saskatchewan. Canada
- Been thanked: 4 times
Hey Matt,
I used to remove those all the time off trade ins when I worked for Toyota. I always used a heatgun and a razor blade, sounds really scary but I was able to get them off with no scratches.
A less intimidating way would be to heat it up then use your finger nails. If the metal surface gets to hot to the touch you risk damaging your paint, so don't heat it up excessively. By the way I was in Denver this past weekend, didn't get a chance to drop by though, did enjoy your 17" of fresh powder at Copper however!
- Jesse
I used to remove those all the time off trade ins when I worked for Toyota. I always used a heatgun and a razor blade, sounds really scary but I was able to get them off with no scratches.
A less intimidating way would be to heat it up then use your finger nails. If the metal surface gets to hot to the touch you risk damaging your paint, so don't heat it up excessively. By the way I was in Denver this past weekend, didn't get a chance to drop by though, did enjoy your 17" of fresh powder at Copper however!
- Jesse
1998 S70 T5 SE 290,000 KM sideswiped total loss(Sweet ride!)
2007 S60 2.5T loaded 63,000 KM SOLD!
2006 XC70 350,000 KM, 2" BadSwede lift kit, steel skidplate, Hilton Stage 1 tune, big burly tires
2008 S80 V8 245,000 KM SOLD!
2015 V60 T5 Premier+ 98,000KM
2007 S60 2.5T loaded 63,000 KM SOLD!
2006 XC70 350,000 KM, 2" BadSwede lift kit, steel skidplate, Hilton Stage 1 tune, big burly tires
2008 S80 V8 245,000 KM SOLD!
2015 V60 T5 Premier+ 98,000KM
-
JRL
- Posts: 9350
- Joined: 22 November 2005
- Year and Model: Several
- Location: 19333
- Been thanked: 16 times
Heat gun or hair dryer yes,
Razor blade!!!
That's just asking for trouble, one slip and you scratch the paint, so that would be a big NO!
You can buy PLASTIC razor blades, (most body shops have them, stop by and ask for one)
Usually a hair dryer and fingernails will get all but the most stubborn decals off quite easily
Razor blade!!!
That's just asking for trouble, one slip and you scratch the paint, so that would be a big NO!You can buy PLASTIC razor blades, (most body shops have them, stop by and ask for one)
Usually a hair dryer and fingernails will get all but the most stubborn decals off quite easily
Mod note. Jim passed away in early 2022, his contributions to this forum are immortal, and he is missed. RIP
2000 V70R Black, 144,000 miles Wife's R.
2007 V70 2.5T White/Oak 111,000 MILES. Polestar tune, IPD bars, rear spoiler, dark grey Thors, DWS 06, HU850, sub.
2000 V70R Black, 144,000 miles Wife's R.
2007 V70 2.5T White/Oak 111,000 MILES. Polestar tune, IPD bars, rear spoiler, dark grey Thors, DWS 06, HU850, sub.
-
matthew1
- Site Admin
- Posts: 14478
- Joined: 14 September 2002
- Year and Model: 850 T5, 1997
- Location: Denver, Colorado, US
- Has thanked: 2654 times
- Been thanked: 1247 times
- Contact:
JRL and Jesse, thanks. I'll use a hair dryer and fingernails. If it takes more than that, I guess I'll cross that bridge when I get to it.
I can't believe dealers have gotten away with putting their advertising on $20k, $30k, $40k products they sell, for decades. If I ever buy a new car (never have, neither have I leased a new car), part of the contract will surely state no dealer decal or badge, thank you.
I can't believe dealers have gotten away with putting their advertising on $20k, $30k, $40k products they sell, for decades. If I ever buy a new car (never have, neither have I leased a new car), part of the contract will surely state no dealer decal or badge, thank you.
Nothing like it, nothing like it.IVIUSTANG wrote:... didn't get a chance to drop by though, did enjoy your 17" of fresh powder at Copper however!
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
-
CapeCodRon
- Posts: 3
- Joined: 5 February 2011
- Year and Model: '97 850 GLT, '98 V70
- Location: Cape Cod, MA
WD-40 works for me! Works well with road tar and other adhesives from window stickers, etc.
I've had good luck with 3M General Purpose Adhesive Remover (08987). Comes in an aerosol can and I'm pretty sure most parts stores would carry it.
I think it's mostly toluene and benzene though, so regular old paint thinner might do just as well for less...
I think it's mostly toluene and benzene though, so regular old paint thinner might do just as well for less...