S40 Temp Dial Question/Problem

gherman · Post by **gherman** » 02 Apr 2011, 03:59

I'm about to embark upon replacing the actuator motor on my 2000 S40. Did you have any luck calibrating it yourself?

Post by **drvolvo** » 05 Apr 2011, 20:59

Yes, if you follow the PDF directions above the damper motor should calibrate correctly when you turn the key to the correct position. I also describe the procedure here https://www.matthewsvolvosite.com/forums ... =8&t=34858

Good Luck

gherman · Post by **gherman** » 11 Apr 2011, 12:31

Thanks for your help, Doc. Got a used motor at a junker and it wors fine...today!

Now if I could only get rid of the buzzing I hear on acceleration...