Login Register

FLUID GURUS

General discussion about Volvos, Volvo parts, your DIY skills, Volvo ownership, and more. Come on in, introduce yourself and say hi! List Volvo events here. Have a nice Volvo? Show it off here. Do you have a question or comment about how MVS works? Ask here.
Post Reply
Volvos rock3
Posts: 84
Joined: 20 February 2011
Year and Model: v70xc, 2002
Location: Danielsville PA

FLUID GURUS

Post by Volvos rock3 »

Have recently done the brake fluid exchange on both the XC and our S80. Have to do the same on my Chevy PU. Can I use my left over ATE super blue DOT 4? truck calls for DOT 3. My indie says there is a difference that may mess with the seals? As always any input is appreciated...Thanks and have a great day! :idea: :?: :?
1996 850 GLT sdn (deceased)
2002 V70XC 118k
2009 S80 3.2 37k
1998 Chevrolet K1500 84k
1965 Pontiac Lemans convt
2009 Chevrolet Tahoe PPV 2x (work)

jimmy57
Posts: 6694
Joined: 12 November 2010
Year and Model: 2004 V70R GT, et al
Location: Ponder Texas
Has thanked: 4 times
Been thanked: 320 times

Post by jimmy57 »

I have not seen the different fluids cause a problem in years. In the past DOT 4 in DOT 3 was fine but DOT 3 in DOT 4 would often result in leaks.
I always buy DOT4 and use in domestics and I've not had any that leaks from that change.

JDS60R
MVS Moderator
Posts: 3532
Joined: 21 February 2009
Year and Model: 2007 S60R 2016 XC70
Location: Mount Juliet, TN
Been thanked: 3 times

Post by JDS60R »

You can mix Dot 4 with Dot 3 but you will lose some of the benefits Dot 4 has - due to the mixing. You can flush a Dot 3 system with Dot 4 without concern. The chemical makeup of Dot 3, 4 and 5.1 are similar. Dot 5 is not similar and is a silicone based fluid vs the glycol based 3,4 and 5.1
Retired

Post Reply