97 854GLT 127K miles
I was checking the temperature via ELM OBD2 reader.
I put in a new thermostat 87C one from Calorstat.
Drove around with the live reading and it was showing anywhere from 95 C to 100 C.
Is this normal? Isn't the idea of thermostat to keep the engine at 87C?
The temperature gauge in the cluster is slightly above 3 o'clock position and stays there once the engine warms up.
Any ideal?
thanks a lot.
Also what temperature is the red zone on the gauge (overheating)?
Is My Engine Running Hot? 87C thermostat; it's showing 95-10
-
Fish stick88
- Posts: 543
- Joined: 24 June 2010
- Year and Model: 1994 - 850 Sedan
- Location: Iowa
Mines is about level too. about 3 o clock, doe it seem like its running hard? are you burning up a noticable amount of oil?
Speed has never killed anyone, suddenly becoming stationary... That's what gets you.
'94 850 Sedan - 160k miles
'94 850 Sedan - 160k miles
-
FlyingVolvo
- Posts: 1822
- Joined: 8 March 2009
- Year and Model: 2000 V70XC
- Location: USA
- Has thanked: 51 times
- Been thanked: 73 times
I'm pretty sure the temperature designation only corresponds to when the thermostat will actually open. It doesn't mean it will necessarily hold the temperature exactly at that number. If your temp gauge is holding perfectly with no fluctuations, then there is nothing to worry about.
2000 V70XC - 340,000 miles
Hilton Tune, 16T Turbo, Mototec 3" downpipe, Blue injectors, IPD Short Ram Filter, Snabb Intake Piping & RIP kit, do88 Intercooler, TME Dual Exhaust, HID Projectors, R Panels, do88 Silicone Hoses
2023 V60 T8 PE
Hilton Tune, 16T Turbo, Mototec 3" downpipe, Blue injectors, IPD Short Ram Filter, Snabb Intake Piping & RIP kit, do88 Intercooler, TME Dual Exhaust, HID Projectors, R Panels, do88 Silicone Hoses
2023 V60 T8 PE
-
tolian2
- Posts: 58
- Joined: 25 June 2007
- Year and Model: 1995 Volvo 855 5sp
- Location: Fort Collins, CO
there's no fluctuation of the gauge whatsoever. once it get's to slightly above 3 o'clock it stays there.
it's only in scanmaster-elm software that i could see temperature changing from 95-100 back and forth, etc.
it's only in scanmaster-elm software that i could see temperature changing from 95-100 back and forth, etc.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 48 Replies
- 9619 Views
-
Last post by bmdubya1198
-
- 1 Replies
- 2269 Views
-
Last post by abscate






