1986 240 turn signal issue

Post by **Jeff1964** » 05 Jul 2011, 12:27

Hi,

My left turn signal now goes blinky-blinky really fast and the right signal is perfectly signalling. I changed both the relay and the turn signal accuator yesterday and the problem remains. What am I missing? Is the lamp burnout indicator relay messed up? The light stays on all the time.

Jeff

Post by **Jeff1964** » 11 Jul 2011, 17:13

I fixed it- The bulb was fine, though not on- so I disconnected and reinserted the connector to the rear left light panel and now the left turn blinker works great!

I also found out that my right rear brake light was burnt out- so my bulb out signal really was right. I did not catch it because nobody was stepping on the brake pedal at the previous times I was checking the lights. But this weekend my wife helped me bleed some new front calipers and I happened to notice that the light was not working.