Rear ended by some idiot on their cell... my loss is your gain. I'm parting out my T5. As I pull stuff off, I'll list it. Otherwise just make a request and we can make it happen. Prices do not include shipping, which will be reasonable. I am located in Albuquerque, New Mexico (which is a state in the US...)
1998 V70 T5 Black / Charcoal Interior
- 197k on the clock
- Rear-end collision
- Clean, charcoal, leather interior
- Seats have very minimal wear
- SC816 radio
-- no dolby, cd changer
- R Bumpers
-- Saffron Front from the new car, cracked on bottom lip
-- Rear Black, scratched from accident, slightly bent, absorber is broken
- Bilstein HD (~30k rear, ~20k front)
- IPD Front/Rear Sway Bars (~2k tops...haven't even changed the oil since install...)
- Subframe with Delrin bushings (~2k)
- Engine -> Shell/Chevron and M1 used thru life
-- no turbo play when checked at sway install
-- new oil seals (~2k)
-- new OEM timing belt & Hepu water pump (and idler/tensioner [mechanical]) (~10k)
-- new spark plugs (wires look newer, Bogis)
-- new engine mounts
- Radiator Assembly (have some looking at individual pieces but I'd rather sell whole) (new OEM Rad ~30k)
- ECU
- MattyMoo rebuilt ABS module
- EMPI axles if they won't fit 98 AWDR
SOLD
-- Radiator shroud
-- Hood
-- Headlights
-- Brakes
-- TCV
-- Seats
-- Radio
-- Taillights
-- Shocks/Struts/Springs
-- Intercooler
Pictures: http://goo.gl/h3s5O
Contact: PM or Call/Text 505.796.8292
PARTOUT: 98 V70 T5 Black on Charcoal / ABQ, NM
PARTOUT: 98 V70 T5 Black on Charcoal / ABQ, NM
Last edited by navajow on 24 Nov 2011, 00:41, edited 1 time in total.
-
TonyMastodon
- Posts: 62
- Joined: 2 October 2010
- Year and Model: 98 V70R
- Location: Seattle
- Been thanked: 1 time
price check on cup holder and driver side window switches?
rear hatch panel w/ grommets
right front blinker bezel
any of those parts? thanks.
right front blinker bezel
any of those parts? thanks.
98’ S70 T5 Turbo Manual - Midnight
01' S60 T5 Turbo- Brandy
98' V70 T5 Turbo - Swifty
93’ 244 n/a - Mr.Chill
91' 940 SE Turbo - Mojo SOLD
83' 242 DL - Bluto SOLD
93' 940 Wagon - Django - SOLD
01' S60 T5 Turbo- Brandy
98' V70 T5 Turbo - Swifty
93’ 244 n/a - Mr.Chill
91' 940 SE Turbo - Mojo SOLD
83' 242 DL - Bluto SOLD
93' 940 Wagon - Django - SOLD
-
bugsbunnies95_850t
- Posts: 70
- Joined: 23 December 2010
- Year and Model: 99 v70R
- Location: Rhode Island
id like to get a price on those sway bars
-
FlyingVolvo
- Posts: 1822
- Joined: 8 March 2009
- Year and Model: 2000 V70XC
- Location: USA
- Has thanked: 51 times
- Been thanked: 73 times
How much for the center console armrest/cup-holder? I want! Mine looks like junk...
Also, how much work is it to get out the inside trip around the radio/ECC and shifter? I don't like the fake wood on mine...
Also, how much work is it to get out the inside trip around the radio/ECC and shifter? I don't like the fake wood on mine...
2000 V70XC - 340,000 miles
Hilton Tune, 16T Turbo, Mototec 3" downpipe, Blue injectors, IPD Short Ram Filter, Snabb Intake Piping & RIP kit, do88 Intercooler, TME Dual Exhaust, HID Projectors, R Panels, do88 Silicone Hoses
2023 V60 T8 PE
Hilton Tune, 16T Turbo, Mototec 3" downpipe, Blue injectors, IPD Short Ram Filter, Snabb Intake Piping & RIP kit, do88 Intercooler, TME Dual Exhaust, HID Projectors, R Panels, do88 Silicone Hoses
2023 V60 T8 PE
I need a bunch of stuff. Rear corner pannel on floor for pass side rear of car, and both corner plastics for the rear as well, outer door seals for rear 2 doors if they are in good shape rear passenger door pannel (my car is a 1998 V70R) I also need the dash top (charcoal or whatever color they call it) Sail pannel on driverd door (little triangular peice above door pannel) and a drivers side door handle assembly. all of these parts will go to further the life of my 372.000 mile car. thanks. if youd rather text me 8019188337