P80 FWD front wheel bearing seals 9492980 30647015

DML · Post by **DML** » 18 Dec 2011, 09:31

I replaced the front wheel hub assembly the other night and noticed that a seal on the back side is missing. Thats probably why the bearing failed. It was a FAG bearing. I used FAG also and don't to replace it any time soon. Does anybody know what the part number is for the wheel hub seal? I have searched and can't find any info.

Thanks

Post by **misha** » 18 Dec 2011, 15:01

Fag bearings are OEM bearings and they are just "install & go".

That said....remove the old one and put in the new one.There are no aditional seals for it.Everything you need is in the box.

Post by **matthew1** » 18 Dec 2011, 15:38

^^^

True. Just did this on my '97 850's LF, FAG brand.

Post by **jimmy57** » 18 Dec 2011, 15:41

I looked up the diagram on VIDA and I see the sealing ring.

For V70's they list 9492980 for chassis number up to 665091 and
30647015 for chassis number 665092 and on.

Funny thing is that I have never seen that seal consistently used. I have taken apart a number of cars that likely never had been apart before and have not found that seal.
WHen I have found them in place the fit seems to have nothing to do with sealing the bearing.

DML · Post by **DML** » 18 Dec 2011, 17:12

So I'm good then on the seal. I didn't want to have to go back in ther to replace it.
Thanks for the info.

Post by **abscate** » 05 Aug 2021, 00:08

Let’s add to this 10 year old thread !

The seal is not installed on most cars in Sweden / Ghent but is a Volvo approved add on

The 9492980 seal has a correct orientation , see pictures

Post by **mecheng** » 05 Aug 2021, 03:34

abscate wrote: 05 Aug 2021, 00:08 Let’s add to this 10 year old thread !

The seal is not installed on most cars in Sweden / Ghent but is a Volvo approved add on

The 9492980 seal has a correct orientation , see pictures

That is brilliant, so it is what they call a dust shield, to keep out water and dirt. How much was it. I elected to try a GmB bearing.
Btw put some anti seize on those splines, they can size with corrosion

Post by **abscate** » 05 Aug 2021, 04:01

Added FCP picture to post, it’s $6 part protecting a $100 bearing amd 4 hours labor

Post by **abscate** » 08 Feb 2022, 07:05

Here is the chassis break info on the seal

Post by **abscate** » 21 Jul 2022, 10:20

Bumpity Bump