Could someone please post a pic of their rear tail lights

MatDesign84 · Post by **MatDesign84** » 12 Jun 2011, 11:26

From the back side of them please. I need to see which bulb holders go where. I have no idea if I have mine in the right place. Neither of my tail brake lights are working right now and since I have had the car I got one of them to work. Now its not lol. Please help. A picture of both sides would be even more than helpful.
Thank you.

Oh, concerning a 90,240.

broke wagon · Post by **broke wagon** » 12 Jun 2011, 13:04

I am not able to post a pic... but the 3 prong bulb holder socket is for the dual filament bulbs and the 2 prong bulb holder socket is for the single filament bulbs. I hope that helps.

MatDesign84 · Post by **MatDesign84** » 12 Jun 2011, 13:20

Yeah, I would have to know which ones are the ones that are supposed to be which though. The guy before me had them all mixed up when he changed to the aftermarket tail lights.

broke wagon · Post by **broke wagon** » 12 Jun 2011, 13:57

I have a wagon... I could see what the wire colors are for each socket. I had looked at the wire diagram in my bently manual at the color codes for the wires.. I hope this might help you....
reverse light - SB silver/black
brake light - Y yellow
tail light - R red
directional - G green

MatDesign84 · Post by **MatDesign84** » 19 Dec 2011, 13:02

Can anyone tell me which bulbs have the shorter base and which have the taller base? In addition which bulbs go in the shorter and the taller.

MatDesign84 · Post by **MatDesign84** » 27 Dec 2011, 16:40

bump, the base I mentioned above... I am referring to the plastic/metal base the bulb sits in.

MatDesign84 · Post by **MatDesign84** » 25 Jan 2012, 08:41