93 945 non tubo no headlights

Lou Rosenbaum · Post by **Lou Rosenbaum** » 11 Feb 2012, 07:04

My low beams stopped working ? With dash switch to low beam position no headlights or tail lights switch to middle position all corners work and brake lights are good no bulb failer light. all fuses are good.is there a relay I missed?
thanks in advance.

Post by **billofdurham** » 11 Feb 2012, 11:42

The only 'relay' for the low beam headlights is the bulb failure relay which can go bad.

Test for voltage at the input side of the low beam fuses (19 & 20). If you don't have voltage there, the bulb failure relay is bad. You can pry the cover off and attempt to re-solder it or get a used one.

Bill.

Lou Rosenbaum · Post by **Lou Rosenbaum** » 28 Feb 2012, 16:23

checked voltage at fuse 19&20 no volts, which is the bulb failure relay?

Post by **billofdurham** » 29 Feb 2012, 11:51

Same place as in your other post: Back row left in the relay board under the radio. It is big, red and round.

Bill.