2000 V70 Oxygen Sensor Bank 1, Sensor 2

sszewczuk · Post by **sszewczuk** » 03 Jul 2012, 09:41

Hello,

I need to replace the Oxygen Sensor behind the CAT (Bank 1 , Sensor 2) on my 2000 V70 and need some help. Does anyone know how to remove the electrical connection clip? I see where they are located but I do not know exactly how to remove them. I know the sensor is unscrewed and that is the easy part but I am not 100% sure how to remove the electrical clip so that I can install the new one. BTW- the new one is from Bosch and is a direct fit. If you have pics- that would even be better.

Thank you all for your help.
Stephen

Post by **jimmy57** » 03 Jul 2012, 09:53

pry connector out of the metal stowage clip by prying out on the curved 1 inch tall end part of that clip. Then pry out and then pull out on the red end as that is the lock and also ejects the O2 sensor connector from the car harness connector.

sszewczuk · Post by **sszewczuk** » 03 Jul 2012, 10:33

do you have pics?

Post by **rspi** » 03 Jul 2012, 10:35

Here you go. Have fun.
http://www.atthetipwebs.com/technologyi ... sensor.htm

sszewczuk · Post by **sszewczuk** » 03 Jul 2012, 11:45

AWESOME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

THANK YOU