Login Register

compression test on S60 T5 2001

Post Reply
volvos60t5x
Posts: 5
Joined: 26 Mar 2012, 14:53
Year and Model: s60 t5
Location: texas

Post by volvos60t5x »

Does anybody knows how much psi should i see on each cylinder?. I have replaced the pcv system and turbo and i started to see smoke again after 400 miles, for the there is 2 options, my valve seals, piston rings are gone or the turbo didnt come well repair.

priapism
Posts: 264
Joined: 22 Jul 2010, 16:23
Year and Model: 01 S60
Location: LA
Been thanked: 1 time

Post by priapism »

I think it's more important that the numbers are even across the board. If one has a big drop off, it shows a problem with that cyl.
Titan LE : S60 2.4t : 91 325i : Spec E30 #33

volvos60t5x
Posts: 5
Joined: 26 Mar 2012, 14:53
Year and Model: s60 t5
Location: texas

Post by volvos60t5x »

thanks, just want to hear a reference.

Quince99
Posts: 2
Joined: 02 Jul 2012, 06:46
Year and Model: S60 2001
Location: United Kingdom

Post by Quince99 »

I was given the figure of "over 140psi" by a Volvo specialist and a variance between cylinders of not more than 10%. This was for a S60 T5 2001 model.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post