Lets wire up a wideband.

[RobTheModd]

Hey gang, so ive been noticing I run rich alot and such is the case I pop alot of fire out the exhaust.
Decided to get a wideband to monitor my air/fuel ratio.
Everything is pluged in and ready to be wired up now. And thats where I need some help.

The manufacturer suggests wiring the power to the ignition wire.
Where would be a good place to wire up the wide band to, obviously with an inline fuse as they recommend a 5amp inline.

The car in question is a 1998 s70 T5
and I currently have the main box (where everything wires and plugs into) in the glove box, since I used the passenger side pass through for the sensor harness.


This is a PLX DM6 btw if anyone needs the info.