Hi all
Had to disconnect my battery yesterday for about two hours as I had to change my front lambda sensor and when I reconnected all works fine except for the auto up/down on all windows.
Is there a way to "reset" this function?
Thank you
2009 XC60 Auto windows don't work anymore
-
Tiny Tim 077
- Posts: 42
- Joined: 15 Oct 2011, 02:02
- Year and Model: XC90 Volvo
- Location: South africa
It should be in the manual.
Press and hold the window down button (but not fully depressed in the auto down mode) until the window goes down and continue to hold down for a few seconds. Repeat the same procedure to put the window up. The window should be programmed for auto down now.
Press and hold the window down button (but not fully depressed in the auto down mode) until the window goes down and continue to hold down for a few seconds. Repeat the same procedure to put the window up. The window should be programmed for auto down now.
-
jimmy57
- Posts: 6696
- Joined: 12 Nov 2010, 09:25
- Year and Model: 2004 V70R GT, et al
- Location: Ponder Texas
- Has thanked: 5 times
- Been thanked: 322 times
On P3 platform models you only need to roll the window all the way up and then hold the switch up for a bit over 3 seconds to reset the closed end point counter in door module.
-
Tiny Tim 077
- Posts: 42
- Joined: 15 Oct 2011, 02:02
- Year and Model: XC90 Volvo
- Location: South africa
Hi.
Sorry for the late reply. Thank you for the help, much appreciated.
Sorry for the late reply. Thank you for the help, much appreciated.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 937 Views
-
Last post by precopster
-
- 0 Replies
- 776 Views
-
Last post by Scoot329
-
- 0 Replies
- 558 Views
-
Last post by heman0118
-
- 12 Replies
- 2531 Views
-
Last post by kawish
-
- 2 Replies
- 1009 Views
-
Last post by voom8






