98 s70 GLT Will not start after repairs

chefbob · Post by **chefbob** » 22 Feb 2014, 08:46

I have a 98 s70 GLT that started missing and threw an intermitent miss in the on.1 clyinder code . I replaced the spark plug # 1, wires, cap and rotor. The car started but missed badly before I did anything now it won't start at all. The motor turn over but dosern't fire at all. I can smell fuel and since I started it before begining the repairs. i wonder if I got the plug wires in the wrong order? Could anyone give me the wire location- firing order on the s70 GLT Turbo. I read one post saying that the chilton manual has the firing order wrong. I have the Hanes manual and I want to be sure before making matters worse.
Thanks for any help you guys have been great with all the repairs I have done In the past.
Chef Bob

Post by **polskamafia mjl** » 22 Feb 2014, 10:07

I believe its the Haynes manual that's wrong. This is the correct order:

http://volvospeed.com/volvo_repairs_how ... plugs.html

chefbob · Post by **chefbob** » 22 Feb 2014, 10:13

thanks I will check the cap and wires.
Chef Bop

Post by **rspi** » 22 Feb 2014, 10:22

chefbob · Post by **chefbob** » 01 Mar 2014, 09:54

Thanks Rapi we are going to look at it today its finally above 15 degrees (40) I will let you know the results.
Chef Bob