Hey, (car info volvo C70 1999 2.0 t5 and manual).
I fixed my "white" version ETM with sacer tps.
But now ETS light come on.
And tester gave next error codes.
ECM-903C
ECM-91A7
Can someone help me figure out where the problem is?
ETM fixed Sacer TPS, but the ETS light is still on.
-
precopster
- Posts: 7543
- Joined: 21 August 2010
- Year and Model: Lots
- Location: Melbourne Australia
- Has thanked: 8 times
- Been thanked: 128 times
The sensor only repairs ETMs with codes 9150 and/or 9160. You need another ETM.
Current cars VW Transporter 2.5TDI, 2010 XC90 D5 R Design
I think I found the fault ... I opened the corrected ETM again and one pin was loose.
ETM's first after repair the car worked perfectly for a week followed by the always more and more frequently ETS light came on and the accelerator pedal did not work, before the car to start again.
When you correct Sacer ... Please attach the pins carefully!
ETM's first after repair the car worked perfectly for a week followed by the always more and more frequently ETS light came on and the accelerator pedal did not work, before the car to start again.
When you correct Sacer ... Please attach the pins carefully!
-
- Similar Topics
- Replies
- Views
- Last post