Bump
Anyone replaced these bushings?
850 Sway Bar Bushings
-
matthew1
- Site Admin
- Posts: 14478
- Joined: 14 September 2002
- Year and Model: 850 T5, 1997
- Location: Denver, Colorado, US
- Has thanked: 2654 times
- Been thanked: 1247 times
- Contact:
Re: 850 Sway Bar Bushings
Help keep MVS on the web -> click sponsors' links here on MVS when you buy from them.
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
Also -> Amazon link. Click that when you go to buy something on Amazon and MVS gets a cut!
1998 V70, no dash lights on
1997 850 T5 [gone] w/ MSD ignition coil, Hallman manual boost controller, injectors, R bumper, OMP strut brace
2004 V70 R [gone]
How to Thank someone for their post
-
precopster
- Posts: 7543
- Joined: 21 August 2010
- Year and Model: Lots
- Location: Melbourne Australia
- Has thanked: 8 times
- Been thanked: 128 times
The '98 V70R I just picked up requires at least one of these on the left front side at 235K miles. I doubt mine is 20mm. There would be quite afew aftermarket alternatives in different sizes I would imagine.
Use of sharp woodworking chisels would probably do the trick in removal of the vulcanised rubber on the original bar....would be a bear of a job though......
Found these on ebay for 20mm bars: http://m.ebay.com.au/itm/251608596083?nav=SEARCH
Use of sharp woodworking chisels would probably do the trick in removal of the vulcanised rubber on the original bar....would be a bear of a job though......
Found these on ebay for 20mm bars: http://m.ebay.com.au/itm/251608596083?nav=SEARCH
Last edited by precopster on 19 Aug 2014, 15:26, edited 1 time in total.
Current cars VW Transporter 2.5TDI, 2010 XC90 D5 R Design
-
mecheng
- Posts: 1271
- Joined: 27 March 2014
- Year and Model: 1998 Volvo S70 T5
- Location: Ontario, Canada
- Has thanked: 15 times
- Been thanked: 21 times
I've heard that poly bushings require periodic grease or they become noisy. Try to get something with a nipple
1998 Volvo S70 T5 - SE - 240km - Sold July 2018
1997 Volvo 850 GLT - 190km
Boost is my drug of choice
1997 Volvo 850 GLT - 190km
Boost is my drug of choice
-
Jazzop
- Posts: 89
- Joined: 23 November 2012
- Year and Model: 855 GLT 1996
- Location: USA
- Been thanked: 1 time
Greatly exaggerated scuttlebutt. Proper application of the proper type of lube (silicone-based grease) during installation will keep poly bushings quiet for years. I have some going on 15 years without a squeak.mecheng wrote:I've heard that poly bushings require periodic grease or they become noisy. Try to get something with a nipple
-
- Similar Topics
- Replies
- Views
- Last post