i bought a used '01 S40 (131K miles) from wholesaler thought it was a good deal...CEL came within one month...Codes were MAF, MAP (Boost), O2 sensor (Bank 1 sensor 2), and misfires on all 4 cylinders...
Replaced the MAF, MAP, Coils and plugs as well as Aft O2 sensor...Car will still not run even after the battery was disconnected and codes cleared. Car will turn over but not idle...RPM @ 2K...Cleared codes but now displays 0304 Misfire in 4th cylinder...Before clearing codes there was also a 0420 Cataclytic converter code.
I am grasping at straws now...Will reinstall plug in cylinder 4 tomorrow am...
RGII
2001 S40 displaying MAF, Boost, O2 and Misfire codes
-
RGoodsonii
- Posts: 1
- Joined: 28 July 2014
- Year and Model: S40 2001
- Location: USA
-
babypython
- Posts: 2
- Joined: 9 October 2014
- Year and Model: V40 2000
- Location: Los Angeles
Timing belt probably was loose and jumped. Set the timing statically and it should run.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 19 Replies
- 9260 Views
-
Last post by Barledge
-
- 1 Replies
- 1569 Views
-
Last post by darrylrobert






